Cable Forum
Page 6 of 86 « First 2345 6 789101656 Last »
Show 100 post(s) from this thread on one page

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Virgin Media Internet Service (https://www.cableforum.uk/board/forumdisplay.php?f=12)
-   -   Superhub : Superhub 2 (https://www.cableforum.uk/board/showthread.php?t=33693243)

Dash: CF noob 02-05-2013 16:18
Re: superhub 2
 
Ever ever ever

Perfect Choice 02-05-2013 16:35
Re: superhub 2
 
Expect you get SH2 if your SH goes faulty or you pay. Expect SH1 fault calls to to increase!

thenry 02-05-2013 16:37
Re: superhub 2
 
doubt it. theres still SH1 stock.

Dash: CF noob 02-05-2013 16:37
Re: superhub 2
 
When sh2 becomes standard kit i expect mine to die

thenry 02-05-2013 16:45
Re: superhub 2
 
:LOL:

Kushan 02-05-2013 16:51
Re: superhub 2
 
Quote:
Originally Posted by Chrysalis (Post 35567485)
We had this conversation before but waiting until you start to run out of ip address is too late, I wish UK companies actually could forward think once in a while but there is good news.

The government is planning to enforce isp's to rollout ipv6 in their desire to give every connected device its own ip address. The bad news of course planning and action could be many years apart so that may not be happening any time soon either.
I'm certainly not disagreeing with that at all, but we all know what Virgin's like - if it saves them money in the short term, they'll probably ignore it. And it's not like they're getting a lot of new customers these days to be worried about running out, either.

MovedGoalPosts 02-05-2013 16:52
Re: superhub 2
 
It may be designed to stand upright rather than flat, but is there any provision for it to be wall mounted?

The current SH can be supplied with a wall bracket, although these are apparently rarer than a golden goose, but wall mounting doesn't really work so well given the connectivity for leads from the side. SH2 seems to have connections only on the end so it could be fixed neatly to a wall and yet offer easy access to plug / unplug.

thenry 02-05-2013 16:59
Re: superhub 2
 
Quote:
Originally Posted by Rob (Post 35567519)
It may be designed to stand upright rather than flat, but is there any provision for it to be wall mounted?

The current SH can be supplied with a wall bracket, although these are apparently rarer than a golden goose, but wall mounting doesn't really work so well given the connectivity for leads from the side. SH2 seems to have connections only on the end so it could be fixed neatly to a wall and yet offer easy access to plug / unplug.
theres a tiny hole under the sticker on the bottom :confused: (sticker has the wifi network name, password etc.)

Quote:
Originally Posted by thenry (Post 35567022)

robson689 02-05-2013 17:23
Re: superhub 2
 
I don't think it would be practical for the SH2 to be wall mounted. The way the connectors are it wouldn't look good. With the SH1 it was good because the connectors are on the back so they would be hidden if it was wall mounted.

BenMcr 02-05-2013 17:31
Re: superhub 2
 
Quote:
Originally Posted by robson689 (Post 35567525)
I don't think it would be practical for the SH2 to be wall mounted. The way the connectors are it wouldn't look good. With the SH1 it was good because the connectors are on the back so they would be hidden if it was wall mounted.
Also I believe the SH2 broadcasts it's signal out of both sides and the top - wall mounting it would risk blocking one of the signal directions

babis3g 02-05-2013 17:49
Re: superhub 2
 
The SH 2 broadcast its signal best where the front lights are ... so where facing the leds lights is the best signal ;) perhaps with about 45 -60 degree better range ... than sides or backwards

... at least that what i am getting from my tests and if you move it slightly left or right can make difference (where facing the leds) in signal

robson689 02-05-2013 18:08
Re: superhub 2
 
When you look into the top, you can see the antennas. There is 3 on the top left and 1 on the top right so as Ben said, depending on which way you would wall mount it you would either block 1 antenna or 3.

craigj2k12 02-05-2013 18:16
Re: superhub 2
 
Quote:
Originally Posted by robson689 (Post 35567537)
When you look into the top, you can see the antennas. There is 3 on the top left and 1 on the top right so as Ben said, depending on which way you would wall mount it you would either block 1 antenna or 3.
Look into the top?

Take it apart! :D

---------- Post added at 17:16 ---------- Previous post was at 17:16 ----------

Were there any rules in the trial not permitting you to open the device?

BenMcr 02-05-2013 18:18
Re: superhub 2
 
Quote:
Originally Posted by craigj2k12 (Post 35567540)
Were there any rules in the trial not permitting you to open the device?
That would be covered by your general terms and conditions which prohibit you tampering with VM devices
Quote:
E2. You are responsible for making sure that our equipment is safe and used properly at all times. To do this, you agree to do the following:
d. Not tamper with disassemble, misuse, neglect or damage our equipment;
e. Not remove, tamper with or cross out any words or labels on our equipment.

thenry 02-05-2013 18:19
Re: superhub 2
 
Quote:
Originally Posted by craigj2k12 (Post 35567540)
Were there any rules in the trial not permitting you to open the device?
I don't think anyone will be able to answer that although its a dead cert that 'someone' opened it up :angel:


All times are GMT +1. The time now is 07:28.
Page 6 of 86 « First 2345 6 789101656 Last »
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum