Originally Posted by Chrysalis (Post 35248992)

ok I finished playing.

Was harder to do and I also failed.

On the vmng300 if removing the cable it seems it eithers works with normal power levels or doesnt work, I couldnt get it to be partially connected at reduced power levels. The numerous recconections were all on the same channel.

When I tried on the superhub because of bridge mode I had the same problem I had with the vmng300 in that I couldnt keep refreshing the page to check the channel status as I had to keep doing dhcp renew's on the router to keep been able to connect to the GUI, the superhub had an additional problem because of this I couldnt relogin after a dhcp renew due to a ghosted session and the superhub restriction of one login at a time. Nevertherless I did about 10 attempts and all same channel.

So I am stuck with this jitter now until VM do another upgrade.

Pinging 194.168.4.100 with 32 bytes of data:
Reply from 194.168.4.100: bytes=32 time=11ms TTL=252
Reply from 194.168.4.100: bytes=32 time=9ms TTL=252
Reply from 194.168.4.100: bytes=32 time=22ms TTL=252
Reply from 194.168.4.100: bytes=32 time=25ms TTL=252
Reply from 194.168.4.100: bytes=32 time=12ms TTL=252
Reply from 194.168.4.100: bytes=32 time=11ms TTL=252
Reply from 194.168.4.100: bytes=32 time=9ms TTL=252
Reply from 194.168.4.100: bytes=32 time=8ms TTL=252
Reply from 194.168.4.100: bytes=32 time=11ms TTL=252
Reply from 194.168.4.100: bytes=32 time=21ms TTL=252

Ping statistics for 194.168.4.100:
Packets: Sent = 10, Received = 10, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 8ms, Maximum = 25ms, Average = 13ms

It was only 2-3 weeks or so back when ignition signed up and I posted on his thread I had much better then that to the same ip.

Originally Posted by pip08456 (Post 35249025)

Told you it wouldn't work!:D

Originally Posted by craigj2k11 (Post 35249030)

your sometimes right ;)

Originally Posted by pip08456 (Post 35249034)

Most times but don't always put it over well.

Originally Posted by pip08456 (Post 35249040)

Yeh bvut you think channels make a difference- they don't!

Originally Posted by pip08456 (Post 35249114)

Pantomime time!!!

No they don't!!!

He's behind you!!!:D:D:D:D:D

Originally Posted by craigj2k11 (Post 35248816)

the superhub puts them out of order since R25, dont know why, it was reported in the beta firmware thread but they said it didnt matter. However the VMNG300 puts them in order

Originally Posted by Skie (Post 35249205)

I have a VMNG300, not a Superhub

Originally Posted by Chrysalis (Post 35249195)

hmm there is a 2nd channel, I got one on 3.58mhz and the ID is 4.

The modem d/c by itself and recconected and I was on that channel but it couldnt lock to a downstream so I waited and then it came back online but back on 4.58mhz :(

I have had about 2 or 3 d/c during the day as well which were not me messing about.