Re: [GUIDE] Dir-615 to dd-wrt
 

I've never had this problem with DD-WRT.

I always unplug the power from the modem when updating the router's firmware, then once that's done I power up the modem and let it settle down before powering up the router. It will then grant the router's MAC address a new IP, which will be different to the IP the modem issues to your PC's MAC address. I'm guessing you haven't unplugged the modem, which explains why cloning your PC's MAC is working with the router.

The DD-WRT forums always recommend doing a 30/30/30 reset before and after updating the firmware. This will wipe all settings and restore the firmware to default settings.

Re: [GUIDE] Dir-615 to dd-wrt
 

yes I deliberatly kept the modem powered up.

so the issue perhaps was I didnt let the dhcp expire.

shame on the firmware upgrade procedure, I dont really fancy reconfiguring it all again, but probably later on I will do it.

browsing speeds seem to stall sometimes using this router which is why I want to try and upgrade the firmware.

Re: [GUIDE] Dir-615 to dd-wrt
 

A 30/30/30 reset is usually the best thing to do for any router before and after upgrading the firmware. It makes sure all settings and memory stores are dumped, so that you start with a clean router for the new firmware.

I've had the most success and stable performance with DD-WRT build 14311 on my DIR-615 D2.

Re: [GUIDE] Dir-615 to dd-wrt
 

JFYI, I didnt do any resets and Im working just fine.

Re: [GUIDE] Dir-615 to dd-wrt
 

thanks, but for now I decided to stay on this firmware. Seems stable now and performs well enough.

is a bit annoying that when reconfiguring settings it resets tcp connections but other then that seems a decent router feature wise.

Re: [GUIDE] Dir-615 to dd-wrt
 

I ended up upgrading :), the old 13xxx version was for the dir600 which bugged me, I did the same as paul didnt bother with the 30/30/30 rubbish and works fine.

ran that command to fix the red led and saved it as a startup command.

Re: [GUIDE] Dir-615 to dd-wrt
 

I haven't botheresd to run the commands to change the lights, but it's reported that the reset light reverts to red after the router has been power cycled.

Re: [GUIDE] Dir-615 to dd-wrt
 

yep thats why I added it to startup, I assume that will fix that problem. If it doesnt it will be ok I guess as I dont plan to power cycle the router and will probably be powered on for months at a time.

Re: [GUIDE] Dir-615 to dd-wrt
 

Apparently it makes no difference and it goes back to red on reboot.

I've set DD-WRT to reboot the router early every morning, just to flush any possible memory leaks, etc.

Re: [GUIDE] Dir-615 to dd-wrt
 

is it supposed to be blue instead?

on the old 13xxx version there was no led permanently lit.
on 14311 it defaults to red and reverts to blue after the command.

Re: [GUIDE] Dir-615 to dd-wrt
 

I'm sure the last time I put D-Link firmware back on the side light was never lit during normal operation and only lit up blue when pressed.

Re: [GUIDE] Dir-615 to dd-wrt
 

yeah I am thinking of going back to 13xxx, as I understand it the only real issues 13xxx has is wireless, I can avoid using wireless on this router and I will just put up with it saying its a dir600. This new version seems to have occasional problems browsing and the blue light is annoying me.

Re: [GUIDE] Dir-615 to dd-wrt
 

Been reading about this DD-WRT update for the last few days after not being too impressed by the standard D-Link firmware and the general performance of the router.

I'm wondering though does the DD-WRT firmware really improve performance? Or does it just allow you to change more options?

Re: [GUIDE] Dir-615 to dd-wrt
 

Blue light ?

Re: [GUIDE] Dir-615 to dd-wrt
 

on the side of the router, on original VM firmware and the 13xxx by default it turned red during flashing (so you should know which light I mean).

after flashing 14xxx the red stayed on all the time, I then ran a command which made it blue all the time.

However I have now managed to solve it and stay on 14311, there is another command that turns it completely off again.