Cable Forum
Page 3 of 6 12 3 456
Show 100 post(s) from this thread on one page

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Virgin Media Internet Service (https://www.cableforum.uk/board/forumdisplay.php?f=12)
-   -   General : superhub 2 software version V1.01.29 Out Now (https://www.cableforum.uk/board/showthread.php?t=33697647)

cook1984 20-05-2014 21:50
Re: superhub 2 software version V1.01.29 Out Now
 
My shub2 just had a massive brain fart and reset. It appears to have chosen that precise moment, while I was watching YouTube, to do the firmware update. Afterwards it needed a couple of power cycles to work again. What a POS.

Slyder 21-05-2014 20:46
Re: superhub 2 software version V1.01.29 Out Now
 
Quote:
Originally Posted by Slyder (Post 35698609)
Updated in Coventry and so far so good.
Well I thought it was ok.. wouldn't connect to any on-lines since update.

quick restore to factory defaults fixed the issue :)

adduxi 22-05-2014 14:47
Re: superhub 2 software version V1.01.29 Out Now
 
My SH froze yesterday afternoon and I had to do a pinhole reset. Once it rebooted it installed .29. It's now back in Modem Mode :)

qasdfdsaq 22-05-2014 15:28
Re: superhub 2 software version V1.01.29 Out Now
 
Interesting. I wonder if many normal users would be affected by the same issue - plenty of ordinary consumers probably wouldn't know how to do a pinhole reset.

adduxi 22-05-2014 21:14
Re: superhub 2 software version V1.01.29 Out Now
 
Quote:
Originally Posted by qasdfdsaq (Post 35700451)
Interesting. I wonder if many normal users would be affected by the same issue - plenty of ordinary consumers probably wouldn't know how to do a pinhole reset.
Not too many I think. I've been over on the Official VM forum and there is a .29 thread. Seems to be fairly successful.

However, the buggy "Clear Network Log" in Modem Mode is still there ..... ;)

ianch99 22-05-2014 21:40
Re: superhub 2 software version V1.01.29 Out Now
 
Quote:
Originally Posted by adduxi (Post 35700594)
However, the buggy "Clear Network Log" in Modem Mode is still there ..... ;)
I think you need to be logged in to do this, not sure though ..

Coffeeguy 22-05-2014 23:51
Re: superhub 2 software version V1.01.29 Out Now
 
Still on .26 here and no, it's not possible to get to the network log page once logged in. Even after logging in and manually going to the network log page, it still gives you the login button. Trust VM to screw up things.

BT sucker punched VM with their HH5. By the time VM come around to releasing a AC Superhub, there will be a new wireless standard.

qasdfdsaq 22-05-2014 23:54
Re: superhub 2 software version V1.01.29 Out Now
 
Quote:
Originally Posted by adduxi (Post 35700594)
Not too many I think. I've been over on the Official VM forum and there is a .29 thread. Seems to be fairly successful.

However, the buggy "Clear Network Log" in Modem Mode is still there ..... ;)
Well I would guess that someone who visits a tech forum would know how to reset a router, it's the people that know neither that I'm concerned about. They'll probably end up phoning customer services and get told to do the reset over the phone - but that's still not ideal.

alanbjames 23-05-2014 02:03
Re: superhub 2 software version V1.01.29 Out Now
 
im on 29 and all lights are stable here.

progers 23-05-2014 08:43
Re: superhub 2 software version V1.01.29 Out Now
 
Still waiting here, done a couple of reboots but no joy yet ��

Kushan 23-05-2014 09:08
Re: superhub 2 software version V1.01.29 Out Now
 
Quote:
Originally Posted by Coffeeguy (Post 35700661)
BT sucker punched VM with their HH5. By the time VM come around to releasing a AC Superhub, there will be a new wireless standard.
I think you're overestimating how many people actually have ac equipment in their homes.

karma mechanic 23-05-2014 10:26
Re: superhub 2 software version V1.01.29 Out Now
 
So is the rollout of .29 supposed to be complete?
Mine is being recalcitrant, I've done a power cycle this morning and it came up with one upstream and a lot of T3s, did it again and it is now fine but still on .26.

Was it something I said to it? :erm:

adduxi 23-05-2014 11:07
Re: superhub 2 software version V1.01.29 Out Now
 
Quote:
Originally Posted by ianch99 (Post 35700597)
I think you need to be logged in to do this, not sure though ..
Yes, correct, you can log in and access the so called 'hidden' pages when in Modem Mode. This will allow the clearing of logs, amongst other things.

However, it can't be done in Modem Mode per se. :)

RobboEdin 23-05-2014 11:22
Re: superhub 2 software version V1.01.29 Out Now
 
Quote:
Originally Posted by karma mechanic (Post 35700710)
So is the rollout of .29 supposed to be complete?
Mine is being recalcitrant, I've done a power cycle this morning and it came up with one upstream and a lot of T3s, did it again and it is now fine but still on .26.

Was it something I said to it? :erm:
The roll-out is incomplete.

karma mechanic 23-05-2014 11:33
Re: superhub 2 software version V1.01.29 Out Now
 
Quote:
Originally Posted by RobboEdin (Post 35700728)
The roll-out is incomplete.
Thanks. I don't feel so left out now.


All times are GMT +1. The time now is 07:28.
Page 3 of 6 12 3 456
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum