Cable Forum
Page 3 of 3 12 3
Show 100 post(s) from this thread on one page

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Virgin Media TV Service (https://www.cableforum.uk/board/forumdisplay.php?f=11)
-   -   NTL HD Problems (https://www.cableforum.uk/board/showthread.php?t=33603931)

EssDee 26-11-2006 12:45
Re: NTL HD Problems
 
No probs.

Just been doing some testing on Scart and HDMI. The PQ on BBC HD (channel 108) thru HDMI is obviously superior, however for SD broadcasts the quality is better thru Scart. Is this what to expect from upscaling? It's going to be a pain having to chop and change the TVDrive config depending on what you are watching.

lostbhoy24 26-11-2006 22:29
Re: NTL HD Problems
 
Well I would say from what I have seen its much better being upscaled. Even channel 5 looked as if it was HD late Friday morning when the football was being shown. For a minute I actually thought it was being broadcast in HD it looked that good. But maybe the performance may vary depending on what tv or the strength of signal etc. I will prob use HDMI from now on.

confused.com 06-03-2007 18:24
Re: NTL HD Problems
 
I have the same tv as lostbhouy24 and have just had an hd tvdrive box installed. I am having the same problems as him and have tried the same things to remedy them as him, hdmi to dvi plus the rgb leads,etc

When i go to the change display & audio setting and make the changes as per the tvdrive booklet and then do the confirm test my picture vanishes. I also do not get asked to confirm that the picture is ok as per the booklet.

When i go back to the display settings it defaults back to my original settings.

Any help would be greatly appreciated.

Please do not be too technical.

Confused.com :confused:

rdhw 07-03-2007 18:37
Re: NTL HD Problems
 
Quote:
Originally Posted by lostbhoy24 (Post 34165220)
tried to access the HD on demand content but doent even let us do that as it comes up with message saying unable to view HD. It could be something to do with the copy protection but I thought with the HDMI to DVI cable we would still be able to get the signal.
No, you cannot view HD over DVI unless your DVI display supports HDCP. If you see this message, it means that your display does not support HDCP. Most HDMI displays support HDCP, but DVI displays might or might not do so.

feynmann 07-03-2007 21:05
Re: NTL HD Problems
 
Quote:
Originally Posted by confused.com (Post 34244039)
I have the same tv as lostbhouy24 and have just had an hd tvdrive box installed. I am having the same problems as him and have tried the same things to remedy them as him, hdmi to dvi plus the rgb leads,etc

When i go to the change display & audio setting and make the changes as per the tvdrive booklet and then do the confirm test my picture vanishes. I also do not get asked to confirm that the picture is ok as per the booklet.

When i go back to the display settings it defaults back to my original settings.

Any help would be greatly appreciated.

Please do not be too technical.

Confused.com :confused:

After you press ok -you need to change to your HDMI channel on your
television (using tv remote), you will then see a screen which will ask you
to press ok or text button to confirm the settings.

If you dont do this the box will revert to a scart output on your original
settings.

Hope this helps.

shaf_2008 08-03-2007 00:17
Re: NTL HD Problems
 
Quote:
Originally Posted by confused.com (Post 34244039)
I have the same tv as lostbhouy24 and have just had an hd tvdrive box installed. I am having the same problems as him and have tried the same things to remedy them as him, hdmi to dvi plus the rgb leads,etc

When i go to the change display & audio setting and make the changes as per the tvdrive booklet and then do the confirm test my picture vanishes. I also do not get asked to confirm that the picture is ok as per the booklet.

When i go back to the display settings it defaults back to my original settings.

Any help would be greatly appreciated.

Please do not be too technical.

Confused.com :confused:

I had the same problem....before you comfirm the settings, you need to change the input on your TV. So:

1. change display settings on your V+ box to HDMI hidef or COMPONENT depending what you are using...but dont press ok just yet.

2.change the input on your TV to the specific HD source

3.at this stage the screen is blank...now press ok on the V+ remote twice-the picture will then appear and will ask you to confirm settings by pressing TEXT on your V+ remote.


worked for me fine ;)

Wiciu 08-03-2007 16:35
Re: NTL HD Problems
 
Quote:
Originally Posted by lostbhoy24 (Post 34166103)
Bought a Left Right cable to insert into the TV Drive from the side ports on the tv but still no audio whenh HDMI running. Hopefully someone may have some idea what is needed cheers


DVI doesn't carry sound, V+ has optical audio socket, so, you need to buy optical cable and set HDMI audio override: ON in Display & Audio Settings. That allow you get DD and 5.1 as well.

Good Luck

confused.com 08-03-2007 19:38
Re: NTL HD Problems
 
Quote:
Originally Posted by shaf_2008 (Post 34245331)
I had the same problem....before you comfirm the settings, you need to change the input on your TV. So:

1. change display settings on your V+ box to HDMI hidef or COMPONENT depending what you are using...but dont press ok just yet.

2.change the input on your TV to the specific HD source

3.at this stage the screen is blank...now press ok on the V+ remote twice-the picture will then appear and will ask you to confirm settings by pressing TEXT on your V+ remote.


worked for me fine ;)
;)

Thanks for that I got it to work straight the way but with no sound, which I knew would happen.

I did get the sound going through phono plugs on the tv drive and the back of the tv but it sounded "tinny" and only came out one speaker on the tv or hi-fi if I connected it to that.

How did you get sound from yours?

Thanks again!


All times are GMT +1. The time now is 19:29.
Page 3 of 3 12 3
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum