Cable Forum
Page 3 of 6 12 3 456
Show 100 post(s) from this thread on one page

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Virgin Media TV Service (https://www.cableforum.uk/board/forumdisplay.php?f=11)
-   -   Useful STB Info (https://www.cableforum.uk/board/showthread.php?t=16344)

Rapid Dr3am 30-10-2006 13:32
Re: Useful STB Info
 
The number is 08451420000 not 08450420000.

Also anytime your box says er or err it requires a tech with the exception of err11, err12, err16, which are outages. TunE is also an outage. NIT is an outage. PACE is the same as 8888 if locks there.

Onscreen error codes:

1050, is interactive no access, perform a mains reset, if not resolved book a troublecall for a tech visit.
1057, teleport fault server to busy restart event/mains reset, if not resolved stage to dq where you'll get a call in 5 days to ask if it's working again.
1059, PPV error send an I1 hit to resolve.

There are loads short of dumping the FDT here.

valor 13-02-2007 15:09
Re: Useful STB Info
 
Thanks for the Info all..Very useful...

welwynrose 08-03-2007 21:01
Re: Useful STB Info
 
Quote:
Originally Posted by Pinkypants (Post 696089)
Interactive and On Demand problems

Standard error messages : IS002 and MO44


PACE Boxes

1. On your NTL remote look for the page up and down buttons. On the center of the remote you should also see small red, yellow, green and blue buttons.

2. Go on to BBC 1 on your NTL cable channels. Once the now and next bar has disappeared on the bottom of the screen, press page up, page down and the blue button frorm the red, yellow and green button selection.

3. You should get a menu on screen with Network Status on the top of the screen. If you have a diary or reminder screen, press TV, re read the above instructions and try again.

4. Go down the More option and press select.

5. On the next page go down to the More option and press select.

6. On the final page you should the Conn (Connection) Status. The Conn status should have 5 - connected next to it. If it states anything less than 5 connected, you have a poor signal quality going to the box. Reboot the box and do the Conn status check again. If you still have a poor connection, a faults tech will need to attend.
I've got the error code IS002 on my 2nd STB when I try to access on demand I've done the above abd the connection status is ok so have reported it to faults but what does card waiting on the last screen mean?

Babbage11 08-03-2007 23:29
Re: Useful STB Info
 
On the TV drive(exTW), press and hold the up & down buttons then press reset. Relese buttons once led says dIAG. This puts you in engineer pages. IIRC you can change modulator channel.

If you press and hold the ok button and reset, it comes up with another screen headed 'Guardian', followed by a load of bumph saying it needs updating, please standby. Underneath this is some hardware/software version info.

Using the up & down buttons on Pace 4000t whilst disconnecting/reconnecting mains also takes you to engineers pages.

K Man 12-03-2007 21:01
Re: Useful STB Info
 
V+ Sci/At 8300DVB specs: http://www.sciatl.com/customers/Source/7004921.pdf


Incredibly useful Fred - LOL

AndyCambs 18-03-2007 18:04
Re: Useful STB Info
 
I had two STB previously, one Pace and one Samsung. Last week, the Pace box was replaced with a V+ box. Delighted with the V+ and everything works fine with that - but I now find that there's no VoD with the Samsung box, and I'm getting the response IS002. It used to be ok, and I'm wondering if the account was set incorrectly when the Pace box was removed?
Anyhow, I called CS this morning, and eventually was told "there's a general problem in your area, and it will be fixed by 8pm Monday night."

I'm a litte sceptical having read this thread, and I think that the Sunday call centre didn't have the knowledge about this fault. I guess it's something that I'm going to have to persist with tomorrow?

ben1390 22-03-2007 15:58
Re: Useful STB Info
 
Does anyone know how to change the RF channel on a V+ box?

AndyCambs 22-03-2007 16:15
Re: Useful STB Info
 
Quote:
Originally Posted by welwynrose (Post 34246163)
I've got the error code IS002 on my 2nd STB when I try to access on demand I've done the above abd the connection status is ok so have reported it to faults but what does card waiting on the last screen mean?
From earlier posts, I recall that IS002 and M041 (I think) mean that your interactive services have not been applied correctly, and it needs to be escalated to second level support. I had it after they installed the V+ box, and the existing Samsung lost its ability to view VOD. A call (well three actually - I initially called on Sunday afternoon) got it working again.

EssDee 25-03-2007 16:58
Re: Useful STB Info
 
Quote:
Originally Posted by topcreator (Post 34257208)
Does anyone know how to change the RF channel on a V+ box?

See post #34 above.

Cheers

Alien 19-04-2007 00:20
Frame advance mode on V+
 
I seem to have found an undocumented feature on the V+ [I did check in the V+ user guide, but can't see any mention of it]. You know how on some VCRs if you pause the tape, then press the fast forward button it goes into frame advance mode? Well it turns out the V+ can do the same thing. Instead of just pressing the FF button though, you have to press & hold it for a second or so. When you do you'll see the mode icon change from pause to both the pause & FF icons. Doesn't work for rewind though.

gcmac 17-05-2007 21:28
Re: Useful STB Info
 
Error 1021????? No on demand.
40 minute wait on helpline.
No help from Virgin Media.
No surprise there.

Does anyone know what this error is.:mad::mad::mad::mad:

on in an hour! 17-05-2007 21:35
Re: Useful STB Info
 
Quote:
Originally Posted by gcmac (Post 34307308)
Error 1021????? No on demand.
40 minute wait on helpline.
No help from Virgin Media.
No surprise there.

Does anyone know what this error is.:mad::mad::mad::mad:
there are plenty of err msgs that you get back from on-demand gcmac,most of them arent a problem with the box,more with the on-demand servers.try your interactive services (just browse anything) if this works ok at least you know your box is locked on to the network..other err msgs begin with: SAEC,meaning about the same.is it when you actually press on demand or is it certain content you are trying to view?

gcmac 17-05-2007 21:40
Re: Useful STB Info
 
If i press interactive on remote it happens.

if i press guide and try and select any service e.g. movies on demand, catch up on demand, etc, etc it happens.
Tried resetting. No change.
???????

---------- Post added at 20:40 ---------- Previous post was at 20:39 ----------

2 weeks it has been like this

on in an hour! 17-05-2007 21:40
Re: Useful STB Info
 
Quote:
Originally Posted by gcmac (Post 34307323)
If i press interactive on remote it happens.

if i press guide and try and select any service e.g. movies on demand, catch up on demand, etc, etc it happens.
Tried resetting. No change.
???????
what make of crap,er,set top box is it m8??

gcmac 17-05-2007 22:05
Re: Useful STB Info
 
pace Di4010-N


All times are GMT +1. The time now is 23:12.
Page 3 of 6 12 3 456
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum