Re: Superhub Firmware Beta Test
 

They have finally released an update on whats actually happening now:

I hope VM are getting some form of compensation from Netgear for their failure in producing Firmware without bugs. Hopefully they can use it to invest in the non Netgear Superhub.

Re: Superhub Firmware Beta Test
 

yep, it works. first thing noticed is lack of ip address in modem stats, see pic:
Attachment 22274

Speed
good to have a decent wireless signal again but speedtests both wired and wireless to multiple servers seem to be rather erratic. varying from 44.2 to 93.3 down and 4 to 7.84 up (wired tests). That could be anything though so I'll keep monitoring it and see how it goes.



Ping and Jitter
Pretty constant. 17ms ping and 2ms jitter on multiple tests.


Power levels etc
Slight increase but again, could be any number of reasons.
Attachment 22275




Will post more as i go on



Phil
.

Re: Superhub Firmware Beta Test
 

ssh stays on now without keepalive packets. So this should at least things like xbox live timeouts.

Re: Superhub Firmware Beta Test
 

The superhub is still adding a chunk of latency to your connection chrysalis judging by the graph

Re: Superhub Firmware Beta Test
 

yep indeed it is.

Re: Superhub Firmware Beta Test
 

http://community.virginmedia.com/t5/...te/td-p/505849

Wish I had pushed more for a VMNG300 now, I said I would wait until Bridge Mode as its only early May. Now its looks like Mid June. 6 weeks after when they originally stated.

Re: Superhub Firmware Beta Test
 

How does one enable the partial bridge mode?
Think my Superhub got the update yesterday, rebooted at 7pmish.

Re: Superhub Firmware Beta Test
 

It comes enabled with the update, as they haven't built any UI controls yet. You have to contact support to disable it.

You should have been sent a PM on the VM forums if you were chosen to test it. Not all Beta testers were chosen, I wasn't.

Re: Superhub Firmware Beta Test
 

It's a bit quiet in here which could mean that the modem mode is working well ?

Re: Superhub Firmware Beta Test
 

Now thats an answer i want to read. I would love to know if its working or not ?

Re: Superhub Firmware Beta Test
 

I don't think enough people who have the early bridge mode also post here regularly, sadly. Because I'd like to know what's going on with it, too. If it works well enough, it buys VM lots of time to work on the very questionable router side of the device. Which, if you think about it, means it would have made more sense to have bridge mode from the beginning... could have saved a lot of hassle and money sending techs out to replace/tweak them or the CEO's office dispatching what remains of the limited VMNG300 stock.

Re: Superhub Firmware Beta Test
 

The feedback on the Beta forums seems positive from what I can see, but there are not that many posters. Don't think it has rolled out to many people.

Re: Superhub Firmware Beta Test
 

I think there are only about 10 of us with the pre beta. From a modem only point of view I can honestly say its rock solid. Works fine with my dir-615 (note to self: think about getting a decent router)

I am having another issue which started around the same time i got the firmware but that is under investigation and appears to be networks related and NOT related to the new firmware.

Basically, it does what it says on the tin. I will answer any questions i can but tbh, there isnt much more to say.

Attachment 22282 Attachment 22283

hth


Phil :cool::D

Re: Superhub Firmware Beta Test
 

I know there were a few others besides myself who were offered it by Mark but we had already left VM for other ISP's. Surprised he didn't offer it to others to replace us.

Re: Superhub Firmware Beta Test
 

I don't know; I think the DIR-615 is a smart little router. The fact it has only 100Mbps LAN ports isn't such a big deal for most people, myself included: any local traffic that needs gigabit goes through the switch which can handle it, with the DIR-615 just handling addressing and WAN side, more or less. Works well in tandem with the VMNG300 and runs recent editions of DD-WRT quite well. Only thing I miss is radvd so I can do 6to4 tunneling, but that's where Teredo comes in.

Good to know it's on the path to being a useful CPE for everybody, even if just the modem side for now. I like the grayed out icons on the splash screen, plus the super simple GUI rendition that is reminiscent of VM's Ambit modems.