![]() |
Re: AMD2400+ cpu temp
But I digress, what about these "Barton 2400's"? (And don't even think about offering up information on Mobile processors) :D
|
Re: AMD2400+ cpu temp
thanks all i will have a go later or 2morrow
|
Re: AMD2400+ cpu temp
Quote:
Personaly I dont see any harm in overrating the cooler. After all the cooler you can run the chip the better it will perform... Oh and iain_herts make sure that if you just hold the case and dont use a strap that you leave the power cable plugged into the psu with the mains off at the plug. That way you will have a good earth and reduce the risk of ESD damage. |
Re: AMD2400+ cpu temp
Quote:
|
Re: AMD2400+ cpu temp
Quote:
|
Re: AMD2400+ cpu temp
the i have is a oem and i have the kit anyway pc tools riststrap so thats not a prop but the cooler is for Application for AMD 3200+ and higher is that ok with a 2400+ i think it would be
|
Re: AMD2400+ cpu temp
Asus probe on my AMD 2400 indicates
CPU 44 MB 32 Fan 5500 Looks fine to me |
Re: AMD2400+ cpu temp
My machine is really letting me down these days. once upon a time mine would run full load @ 40C while all my friends would run around about 50C idle, it was a good time :D.
A couple of months ago I took off my heatsink to fit a 'better' one. im currently using the stock retail AMD heatsink and have been ever since installing this cpu, when it came to clipping the new HS I found that the clip was broken and as such it wasnt seccure so I decided to reattatch My old HS, only problem was I was all out of thermal compound, I tried my best to smooth out what was left of the compound but clearly there must have been airbubbles as my CPU now Idles at 48C - 49C (dont know full load, only just reinstalled my mobo monitor a few mins ago ;) ) |
Re: AMD2400+ cpu temp
Quote:
might be best to invest in a fire extinguisher as well :Yikes: |
Re: AMD2400+ cpu temp
Quote:
In the summer it went up to 65 degs. Gets up to 57 degs when gaming. (I've got the 2400xp as well (oc'd to 2600)) |
Re: AMD2400+ cpu temp
Quote:
Can't see it Can't hear it Can't smell it Can't taste it ( Normaly ) :) But boy it packs a punch |
Re: AMD2400+ cpu temp
Quote:
Its not like I want any of the stuff back, Just a little Dab of thermal Compound would do.... Gonna go down my local PC shop tomorrow and use my few remaining pennies to buy some, Im skint now until payday (2 weeks away :yikes: ) saving up for Driving lessons & Riding lessons. |
Re: AMD2400+ cpu temp
that temperature is shockinigly low for me... my p4 idles at 65C and under load it does to 75... :erm::erm:
|
Re: AMD2400+ cpu temp
Read arctic silvers own instructions...
http://www.arcticsilver.com/arctic_s...structions.htm You should spread it out over the die, before putting the heatsink on. I've got a Barton 2500.. with the stock retail HSF, it would idle mid 40's and under load mid 50's.. sometimes over 60 if the missus had the heating turned right up.. I bought a Thermaltake Silent Boost cooler (the Athlon one, theres 2, one for athlons, one for AMd64's). Now I have it overclocked to 3200+ (2.2ghz), and it max's out at 50 under load. Sometimes alot lower depending on house temperature.. |
Re: AMD2400+ cpu temp
just bouncing along from my previous thread... ive just dismantled my laptop, cleaned out 5 decades worth of dust from the heatsink/heatpipe thingy and my cpu is now at 37C, and hdd at 38C. ambient room is 20C.
hurrah! only problem is i dont have a hand warmer anymore :(. oh, and the thermal paste connecting the heatpipe to the processor block has dried and gone crusty... is that a bad thing? |
| All times are GMT. The time now is 20:11. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum