Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   General IT Discussion (https://www.cableforum.uk/board/forumdisplay.php?f=19)
-   -   CPU Upgrade (https://www.cableforum.uk/board/showthread.php?t=43224)

tabatha 18-02-2006 12:53

Re: CPU Upgrade
 
zinglebarb....Is 1667mhz the best it will do....?

I upgraded as I need a min of 2000 to download/run some apple hd videos on the apple website.....

Why do I not feel a happy bunny....!!!!!

zing_deleted 18-02-2006 12:58

Re: CPU Upgrade
 
well the AMD use rated speeds.If its a xp 2600 the fsb will have to be 166 and will run at 2.075 ghz if you can be assured this is the cpu he installed by all means bump the fsb upto that speed.
You could try Everest here to see if it recognises what the cpu is actually named then we can tell you for sure http://www.majorgeeks.com/download.php?det=4181

The problem with is is the bios may not pick up the correct name of the cpu.There is another way but this involes removing heatsink and cleaning paste of the chip,I cannot recommend this as a course of action.Is there anyone local you can find who knows a bit?

tabatha 18-02-2006 13:36

Re: CPU Upgrade
 
Cheers...will try Everest...

Unfortunately the only person I know locally has crashed his Fathers comp so many times.........

Will post again when Everest has spoken.....Many Thanks

---------- Post added at 13:24 ---------- Previous post was at 13:09 ----------

Back...Some prog....

AMD Athlon xp...1253 MHz...[12.5x100]..[how can you see inside my comp]..dead right !!

Mobo....ECS K7 SEM....[incase that helps with alternatives ]...

Cheers

---------- Post added at 13:36 ---------- Previous post was at 13:24 ----------

Have just rec`d the following email from fitter....

the chip is a 2000XP Athlon
You are seeing the clock speed Rating
AMD rate their chips in different ways to Intel
If you buy say a 2.8 Intel chip it may say 2.8 but it's clock speed is different.
However, it is double the speed of your original 1.3 DURON which was a different chip architecture.
In effect it is the difference between a Celeron and a PIV

Fact....or....b.s.....???

Paul K 18-02-2006 15:35

Re: CPU Upgrade
 
Fact unfortunately, it's 2000XP chip which does not run at 2Ghz :( What did you ask for when you upgraded? Sounds like your tech gave you a techno speak sales pitch and led you to believe you were getting a 2Ghz CPU when you were not getting anything like it.

tabatha 18-02-2006 15:42

Re: CPU Upgrade
 
Paul...I asked for a 2000 minimum, and was/am assured that is what I have.....

Have been into bios...rather vague...sorry...
Frequency is set to ..default...
there are 7 [seven ] other options in "figures "..100/100/33mhz etc..
I can list them all if you think it will help you/anyone....

marky 18-02-2006 15:46

Re: CPU Upgrade
 
What Zinglebarb said here is correct for the Athalon2000 :)

tabatha 18-02-2006 15:49

Re: CPU Upgrade
 
I appreciate that he is correct...I just do not know which columns are which...
Example....100/133/33mhz....What nums represent what...!!

zing_deleted 18-02-2006 15:55

Re: CPU Upgrade
 
Check the ram timings in everest it will give you operating speeds.Under motherboard look for spd figures.Under timings it will say hopefully that the ram will run at 133.If this is the case you need to set the bios to 133/133/33 if the ram is pc 100 I believe your looking for 133/100/33

Edit hold off a sec while i check your manual

EDIT to my EDIT go with 133/100/33 this will run the cpu at correct speed and keep ram at a safe speed
ensure that auto detect dimm/pci clock is enabled and you wont go wrong

tabatha 18-02-2006 16:07

Re: CPU Upgrade
 
Will do, zinglebarb...And if I do not post again...Many Thanks for all your efforts !!!!!!!!......Cheers

zing_deleted 18-02-2006 16:08

Re: CPU Upgrade
 
IF he charged you more than £25 quid for this job I would stand outside his house and shout "This guy is a rip off merchant don't buy anything here "for a few days till he reimburses you :)

tabatha 18-02-2006 16:56

Re: CPU Upgrade
 
Back...Shaking and Sweating...and still not sure....!!!!!

Did as you said..saved and exited..rebooted...

Went back in...getting braver !!...and new settings there..

The not sure bit....

Everest and Sys show no changes...right ??

Everest overclock shows
CPU clock is 1252.varying between point 68/74
Multiplier....12.5..
FSB...100.22 [original 133 mhz]

Does that all make sense ?? Its lost me....

If the best I am going to get is 1660 approx is there any way of telling if the mobo/system will support a faster cpu....or are we talking "major " ??

I was charged £30 for the CPU, £5 for a new fan, the old one was VERY noisy
and " a bottle of red " for fitting..remembering I took the comp to him....fair ?

Cheers...

zing_deleted 18-02-2006 17:36

Re: CPU Upgrade
 
the fsb needs to be 133 and the cpu clock should be 1667
If you changed the setting as I said this should have changed so im a bit baffled

It does look to me like the fsb has not changed and is still 100

When the pc boots at the top left hand side should be the cpu does it get named 2000xp? if the bios setting have held and the cpu is still showing as 1250 then starange things are afoot

tabatha 18-02-2006 17:41

Re: CPU Upgrade
 
I will shut down and recheck.....

zing_deleted 18-02-2006 17:49

Re: CPU Upgrade
 
1 Attachment(s)
Below is the page from your manual the first figure needs to be set to 133 of the cpu/sdram/pci

tabatha 18-02-2006 18:25

Re: CPU Upgrade
 
Too slow to spot CPU name...can try again...??

bios settings confirmed as.....100/133/33MHz...

I do not have an option of..133/100/33...only...
133/133/33..

nothing has changed in overclock..all figures the same as previous post....


All times are GMT. The time now is 03:51.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum