Cable Forum
Page 2 of 2 1 2
Show 100 post(s) from this thread on one page

Cable Forum (https://www.cableforum.uk/board/index.php)
-   General IT Discussion (https://www.cableforum.uk/board/forumdisplay.php?f=19)
-   -   PROLITE B2780HSU-B3 height adjustment (https://www.cableforum.uk/board/showthread.php?t=33709339)

nomadking 06-09-2020 18:06
Re: PROLITE B2780HSU-B3 height adjustment
 
Quote:
Originally Posted by Ken W (Post 36048834)
The one that I purchased is what I wanted and the spec says it is a height adjustable, it is the stand that is faulty as the height adjustment is faulty.
But what is the model number on the monitor and does it have the hole in the stand? They seem to do a wide range of models that look similar and have similar model numbers, eg G variants and GB variants.

---------- Post added at 18:06 ---------- Previous post was at 18:03 ----------

Quote:
Originally Posted by Ken W (Post 36048836)
The B3 is spected as height adjustable.
As per my links the GB-B3 is adjustable, but the G-B3 is not. It's the B after the G that matters.
If the screen can be physically rotated to portrait position, then that suggests it is height adjustable.

SnoopZ 06-09-2020 18:20
Re: PROLITE B2780HSU-B3 height adjustment
 
Quote:
Originally Posted by nomadking (Post 36048835)
The X2783HSU-B3 may not be adjustable, but the XB2783HSU-B3(note the XB rather than X) is.
Needs to be clarification on the actual model number and whether there's a large hole in the stand to run cables through.
Comparing X2783HSU-B1, X2783HSU-B3, and XB2783HSU-B3.
Ergonomics section says height adjustable for XB version.


Looking at the manuals for the height adjustable ones, doesn't give much detail. Sounds like they need a bit of force(ie not simply sliding). No button mentioned. Might need placing face down on soft material(towel?) to protect the screen and then push or pull as required.
Just realised I linked to the wrong part number 2783 instead of 2780, so I still can't find 2780 B3 if I Google.

Ken can you double check the part number and post the link from the website you bought it from?

nomadking 06-09-2020 18:55
Re: PROLITE B2780HSU-B3 height adjustment
 
Just found a link about adjusting the height is Ilyama monitors, complete with video.
How do I adjust my iiyama monitor stand?

This may be the issue.
Quote:
When you first unpack your new iiyama ProLite monitor with a height adjustable stand, you need to follow these instructions to allow you to adjust the height of the monitor. If you don’t follow this process the monitor will remain locked on the stand.
The button is a one-time release. After that at any time, you push or pull to adjust as in this video.


From elsewhere
Quote:
just a tip if your monitor gets stuck (GB2488hsu) might be problem on everyone don't know. but if it gets stuck on the bottem first push down the screen then you can press the button again

Ken W 06-09-2020 19:13
Re: PROLITE B2780HSU-B3 height adjustment
 
Quote:
Originally Posted by nomadking (Post 36048843)
Just found a link about adjusting the height is Ilyama monitors, complete with video.
How do I adjust my iiyama monitor stand?

This may be the issue.
The button is a one-time release. After that at any time, you push or pull to adjust as in this video.


From elsewhere
They do not make that clear in the instructions

Ken W 08-09-2020 09:27
Re: PROLITE B2780HSU-B3 height adjustment
 
Quote:
Originally Posted by Ken W (Post 36048846)
They do not make that clear in the instructions
Novatech will collect the faulty monitor XB2783HSU-B3 and organise the replacement, they verified that it dose have height adjustment.

nomadking 08-09-2020 10:09
Re: PROLITE B2780HSU-B3 height adjustment
 
Have you tried the stopper pin/button? Have you tried the suggestion of pushing the screen down and then pressing the button again?


I should imaging that the stopper pin/button is to prevent it moving around during handling.

Ken W 08-09-2020 10:12
Re: PROLITE B2780HSU-B3 height adjustment
 
Quote:
Originally Posted by nomadking (Post 36049033)
Have you tried the stopper pin/button? Have you tried the suggestion of pushing the screen down and then pressing the button again?


I should imaging that the stopper pin/button is to prevent it moving around during handling.
Tried all that with no success.

nomadking 08-09-2020 10:14
Re: PROLITE B2780HSU-B3 height adjustment
 
At least now you know that you have to release the "stopper" mechanism straight away.

SnoopZ 08-09-2020 10:25
Re: PROLITE B2780HSU-B3 height adjustment
 
Take extra care assembling it's replacement because if you run into the same issue it means you're doing something wrong or not putting enough force on the moving parts.

Ken W 08-09-2020 11:35
Re: PROLITE B2780HSU-B3 height adjustment
 
Quote:
Originally Posted by SnoopZ (Post 36049039)
Take extra care assembling it's replacement because if you run into the same issue it means you're doing something wrong or not putting enough force on the moving parts.
All noted


All times are GMT +1. The time now is 13:07.
Page 2 of 2 1 2
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum