Cable Forum - General superhub 2 software version V1.01.29 Out Now

Page 2 of 6

Show 100 post(s) from this thread on one page

Cable Forum (https://www.cableforum.uk/board/index.php)

- Virgin Media Internet Service (https://www.cableforum.uk/board/forumdisplay.php?f=12)

- - General : superhub 2 software version V1.01.29 Out Now (https://www.cableforum.uk/board/showthread.php?t=33697647)

JPAC	15-05-2014 18:36

Re: superhub 2 software version V1.01.29 Out Now

Did the reboot and now on V1.01.29, see what happens next.

Slyder

15-05-2014 22:24

Re: superhub 2 software version V1.01.29 Out Now

Updated in Coventry and so far so good.

trikz

16-05-2014 15:02

Re: superhub 2 software version V1.01.29 Out Now

I lost an upstream channel when the update came through, should I call virgin about it?

RobboEdin

16-05-2014 15:04

Re: superhub 2 software version V1.01.29 Out Now

Quote:

Originally Posted by trikz (Post 35698724)

I lost an upstream channel when the update came through, should I call virgin about it?

How many down and up do you have?

Kushan

16-05-2014 15:17

Re: superhub 2 software version V1.01.29 Out Now

Have we had an actual changelog for this one yet?

Still on 26, but not rebooted.

BenMcr

16-05-2014 15:23

Re: superhub 2 software version V1.01.29 Out Now

The only advised change I'm aware of is the WiFi boot update.

Also everyone will have the update by Tuesday

Kushan

16-05-2014 17:13

Re: superhub 2 software version V1.01.29 Out Now

Wifi boot update? Is that to close the security vulnerability someone was mentioning the other day?

JPAC	16-05-2014 17:18

Re: superhub 2 software version V1.01.29 Out Now

Would this update have caused the loss of service today from 12.45 to 12.55pm? Windows troubleshooter recommended switching the modem off and on again, seemed to have fixed it for now. No problems before the update.

Synthetic

16-05-2014 17:35

Re: superhub 2 software version V1.01.29 Out Now

Got it here in Newcastle too.

JPAC check your uptime, if the router rebooted chances are it was, you can also check to see if you have the current version, I think it's in "Status"

JPAC	16-05-2014 17:39

Re: superhub 2 software version V1.01.29 Out Now

The SH2 was updated yesterday. The modem lights flickered at 12.45pm today but wouldn't settle, so I switched it off and on again.

qasdfdsaq

16-05-2014 18:23

Re: superhub 2 software version V1.01.29 Out Now

Quote:

Originally Posted by Kushan (Post 35698763)

Wifi boot update? Is that to close the security vulnerability someone was mentioning the other day?

The other day being several months ago?

alanbjames

16-05-2014 18:29

Re: superhub 2 software version V1.01.29 Out Now

mine tried to update but failed...

SW upgrade Failed after download - SW File corruption

Kushan

16-05-2014 19:43

Re: superhub 2 software version V1.01.29 Out Now

Quote:

Originally Posted by qasdfdsaq (Post 35698782)

The other day being several months ago?

Time is relative.

trikz

16-05-2014 21:03

Re: superhub 2 software version V1.01.29 Out Now

Quote:

Originally Posted by RobboEdin (Post 35698725)

How many down and up do you have?

Normally 8 down 2 up, shub2 normally locks on to channel 1 in US-1 then adds a second upstream 2,3 or 4 in US-4.

Right now it's trying to lock on to channel 1 and failing and using one channel of either 2,3 or 4 in US-1.

Ben B

17-05-2014 13:30

Re: superhub 2 software version V1.01.29 Out Now

Mine updated the other day, I notice that the wireless activity lights now only flash when there is actual ul/dl activity rather than just because something's connected to it

All times are GMT +1. The time now is 07:28.

Page 2 of 6

Show 100 post(s) from this thread on one page