Re: New Modem
 

Yup, but i meant that i cant see them doing a firmware update to fix the shub in modem mode. i can see them being bias and doing it to improve router mode to try and encourage people to go back to it

Re: New Modem
 

Theres light at the end of the tunnel me thinks. VM have somewhat uncluttered the path their on given a little pressure to do so, its all in the best interest anyway!! Anywho I do think they will improve modem functionality.

Re: New Modem
 

I'm having connection troubles with Router, I've got my router running to pc from router port 1 with an ethernet cable, the connection keeps dropping though.

It's a linksys E2000 with VMNG300

Re: New Modem
 

Is it the connection to the linksys thats not working?? Or is your modem disconnecting?

Re: New Modem
 

Seems to be working fine now PC don't know whats changed but it's all good.

Home plug in living room is running a bit slow but that could be wiring and distance.

Re: New Modem
 

you can see if you have got a connection with your router and going to the default ip address of 192.168.1.1 and seeing if it has got an external ip (I think mine startd with 82. without checking). Secondly, you can go to 192.168.100.1 and have a look at the modem config and see if it has locked onto the channels etc. I very much doubt any problems you have will be router related because Linksys are awesome :cleader:

All sorted now hopefully :)

Damn!! Connection to PC is playing up again this morning, server not found in web browser.

But that little pic of the monitor and Ethernet lead in bottom right of screen says Internet access. Now and then the yellow icon is on there meaning no Internet access.

It's very frustrating.

But wireless is still working tried it on my iPhone. Seems to be the PC that's the problem connection is dropping in and out a lot.

I haven't got a clue what to do!!

Re: New Modem
 

Are you sure your phone is using wifu and not reverted to 3g when it lost it's connection? What are the lights on the modem and router doing?

No wifi signal was up.

After pc had been on about 5 minutes it started working, seems like it takes a few minutes to warm up, very strange.

The 2 Ethernet lights were light up green. Plus the other lights for Internet, wifi and power.

Re: New Modem
 

Had a VM tech visit today because HD channels were breaking up, I think my power levels have changed.

Cable Modem Downstream
DS-1 DS-2 DS-3 DS-4
Frequency 299000000 307000000 315000000 323000000
Lock Status
(QAM Lock/FEC Sync/MPEG Lock) Y/Y/Y Y/Y/Y Y/Y/Y Y/Y/Y
Channel Id 77 78 79 80
Modulation 256QAM 256QAM 256QAM 256QAM
Symbol Rate
(Msym/sec) 6.952 6.952 6.952 6.952
Interleave Depth I=12
J=17 I=12
J=17 I=12
J=17 I=12
J=17
Power Level
(dBmV) -1.17 -1.81 -1.78 -2.54
RxMER
(dB) 35.60 36.17 36.39 36.17
Correctable
Codewords 5220 2184 1017 765
Uncorrectable
Codewords 307 960 1005 303

Cable Modem Upstream
US-1 US-2 US-3 US-4
Channel Type 2.0 N/A N/A N/A
Channel ID 5 N/A N/A N/A
Frequency
(Hz) 45800000 N/A N/A N/A
Ranging Status Success N/A N/A N/A
Modulation 16QAM N/A N/A N/A
Symbol Rate
(KSym/sec) 5120 N/A N/A N/A
Mini-Slot Size 4 N/A N/A N/A
Power Level
(dBmV) 53.50 N/A N/A N/A
T1 Timeouts 0 0 0 0
T2 Timeouts 0 0 0 0
T3 Timeouts 0 0 0 0
T4 Timeouts 0 0 0 0

Re: New Modem
 

can do 104 Meg from VMNG300 Modem.

Re: New Modem
 

Is that with the BT speed test, I got 104 on there also.

Re: New Modem
 

Yep that correct! I believe that VMNG300 Modem can do 120 Meg no problem

VMNG300 connected to Netgear DGND3700 will be in 1Gb LAN network. And the wi-fi (300+300Mbps) pretty good 104 Meg better than superhub.

Re: New Modem
 

Not when 8 downstream channels get enabled.