Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Virgin Media Internet Service (https://www.cableforum.uk/board/forumdisplay.php?f=12)
-   -   Possible Bug in VMNG300 firmware? (https://www.cableforum.uk/board/showthread.php?t=33677677)

craigj2k12 15-05-2011 17:53

Re: Possible Bug in VMNG300 firmware?
 
Quote:

Originally Posted by zekeisaszekedoes (Post 35237147)
About the only bug I can find is that it says "Channel Id" on downstream (I have 93-96), then the correct "Channel ID" on the upstream (5). Hardly a dealbreaker. :D

Although now I look closer, upstream power level is rated 57 dBmV, is that within nominal range? (Downstream is ~-0.3 for all four.)

shouldnt be above 55

Peter_ 15-05-2011 19:28

Re: Possible Bug in VMNG300 firmware?
 
Quote:

Originally Posted by zekeisaszekedoes (Post 35237147)

Although now I look closer, upstream power level is rated 57 dBmV, is that within nominal range? (Downstream is ~-0.3 for all four.)

If you are having issues with an Upstream that high then we would normally tech it.

craigj2k12 15-05-2011 19:32

Re: Possible Bug in VMNG300 firmware?
 
Quote:

Originally Posted by Masque (Post 35237248)
If you are having issues with an Upstream that high then we would normally tech it.

he wouldnt be having an issue otherwise it would have been apparent, he wouldnt have just "happened to notice it" when he checked the stats

however people report upstream problems at 55.1 never mind 57 :erm:

Peter_ 15-05-2011 19:39

Re: Possible Bug in VMNG300 firmware?
 
Quote:

Originally Posted by craigj2k11 (Post 35237254)
he wouldnt be having an issue otherwise it would have been apparent, he wouldnt have just "happened to notice it" when he checked the stats

however people report upstream problems at 55.1 never mind 57 :erm:

He needs to report it to support to get it teched and it is good for other readers to see such an issue and realise that it can be worth calling in to get it resolved.

craigj2k12 15-05-2011 19:40

Re: Possible Bug in VMNG300 firmware?
 
Quote:

Originally Posted by Masque (Post 35237260)
He needs to report it to support to get it teched and it is good for other readers to see such an issue and realise that it can be worth calling in to get it resolved.

i never said it wasn't :D

Peter_ 15-05-2011 19:43

Re: Possible Bug in VMNG300 firmware?
 
Quote:

Originally Posted by craigj2k11 (Post 35237262)
i never said it wasn't :D

We expect people to call in above 55 as nowadays those levels are more likely to cause issues.

craigj2k12 17-05-2011 18:37

Re: Possible Bug in VMNG300 firmware?
 
well iv just had the superhub hooked up, and (not) to my surprise it is still activated, despite nopanics well written scripts :D

the channel it locked onto for the upstream was channel 6, and had the same frequency as channel 6 on the VMNG, so im missing out on channel 5 here, where has it gone? it was better on channel 5

telfordcable 18-05-2011 12:14

Re: Possible Bug in VMNG300 firmware?
 
Here is mine (VMNG300):

https://www.cableforum.co.uk/images/...2011/05/57.jpg

Peter_ 18-05-2011 12:55

Re: Possible Bug in VMNG300 firmware?
 
Quote:

Originally Posted by telfordcable (Post 35239211)

Post your downstream as well.

telfordcable 18-05-2011 13:04

Re: Possible Bug in VMNG300 firmware?
 
Quote:

Originally Posted by Masque (Post 35239252)
Post your downstream as well.

Here you go:

http://s2.postimage.org/gkc2wsj68/Untitled.jpg

pip08456 18-05-2011 13:48

Re: Possible Bug in VMNG300 firmware?
 
Downstream waaaaay too high for a VMNG300!

Hot_slim_buxom 18-05-2011 13:53

Re: Possible Bug in VMNG300 firmware?
 
Quote:

Originally Posted by pip08456 (Post 35239302)
Downstream waaaaay too high for a VMNG300!


In Telford that probably an averge DS powerlevel.

pip08456 18-05-2011 14:04

Re: Possible Bug in VMNG300 firmware?
 
I just thought I'd humour him for a change as he has posted elsewhere the levels have just been checked by a tech and they are supposedly OK!

Posted today!

Quote:

Originally Posted by telfordcable (Post 35239224)
Right the tech guy just been here and say my power level for 100 meg is now resolved and got max out 98.3Meg downloads and 9.83Meg uploads. He say I can continue to kept my VMNG300 for time being until the superhub fixed the firmware until late 2011 and he say that superhub still issues with 100 & 200 Meg

---------- Post added at 13:35 ---------- Previous post was at 13:29 ----------

I am still in talk and discussing with British Telecom Business of possible getting a Leased Line Fibre Optic (1:1) 100Meg down and 100Meg up £799.99 exc vat per month) 12 months contract with no throttle, no traffic management, totally UNLIMITED usages.


zekeisaszekedoes 18-05-2011 15:17

Re: Possible Bug in VMNG300 firmware?
 
Well mine have creeped higher on the upstream so I've passed it on to VM.

Telford's wild BSing about an £800 leased line... :D

Skie 18-05-2011 18:31

Re: Possible Bug in VMNG300 firmware?
 
Heh, my D/S channel ID's aren't in order: Channel Id 29 27 28

Probably means nothing, but it does seem odd.


All times are GMT. The time now is 16:36.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum