Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   General IT Discussion (https://www.cableforum.uk/board/forumdisplay.php?f=19)
-   -   Dell Dimension 9200 Power Supply (https://www.cableforum.uk/board/showthread.php?t=33674176)

Lister of Smeg 24-01-2011 21:12

Re: Dell Dimension 9200 Power Supply
 
Quote:

Originally Posted by ooogemaflop (Post 35158127)
he is calling me a muppet lmfao

Of course I have no knowledge lol

You clearly don't recommend ****** PSU's over decent high quality ones. Wtf are you the head of PC World tech

Zing 24-01-2011 21:14

Re: Dell Dimension 9200 Power Supply
 
Quote:

Originally Posted by Lister of Smeg (Post 35158129)
You clearly don't recommend ****** PSU's over decent high quality ones. Wtf are you the head of PC World tech

you also do not recommend a 80 quid psu to replace a 250 watt in a basic computer thats 4 years old. Think you need a bit more experience mate cuz you obviously have little in the real world of computers

Blackened 24-01-2011 21:20

Re: Dell Dimension 9200 Power Supply
 
Un-subbed.

Get a bloody room.

MovedGoalPosts 24-01-2011 21:23

Re: Dell Dimension 9200 Power Supply
 
There is no way that for a PC over 4 years old that an expensive well guaranteed PSU is worth the money. It would be worth more than the rest of the PC components combined. Give it another year or two and no doubt the PC would be consigned to the scrap heap. Indeed the owner had already expected that outcome before I said that it was just the PSU which even if I pushed the boat out could be renewed for well under £40.

Peter_ 24-01-2011 21:42

Re: Dell Dimension 9200 Power Supply
 
Quote:

Originally Posted by Lister of Smeg (Post 35158122)
Set of muppets recommending junk to other users.

I have a full set of muppets in the spoiler for you.
:D


MovedGoalPosts 28-01-2011 21:43

Re: Dell Dimension 9200 Power Supply
 
To update, I ended up fitting an Antec 380W PSU http://www.antec.com/Believe_it/prod...==&id=MjIyNA==

It was slightly narrower than the standard Dell PSU at 86 instead of 97mm. And only 2 of the four mounting screw holes lined up on the Dell case, but hey it fitted and the cables had plenty of length to get to the remote parts of the case. I suspect I could have found a cheaper generic or unbadged PSU if I'd looked around. Quite a few though had fans mounted on the top or bottom, rather than the end, and that wouldn't have worked with the way the PSU had to fit the case.


All times are GMT +1. The time now is 07:49.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum