Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Networking (https://www.cableforum.uk/board/forumdisplay.php?f=87)
-   -   Dlink DIR-615 Firmware Update D2 (https://www.cableforum.uk/board/showthread.php?t=33657529)

Ed2020 17-04-2010 17:09

Re: Dlink DIR-615 Firmware Update D2
 
Quote:

Originally Posted by 1 time only (Post 35003284)
Afternoon all :)

I just tried S77007 files and I managed to get the first file flashed to my router but as from "Change your ip address to 192.168.1.5 or 192.168.1.xxx" I'm completely stuck :(

If I change my ip to anything other than what the pc want's to give me automatically I have no access to anything.

If I leave it on automatically assign ip then I have internet access but I can no longer get into my router. By that I mean that I just get just an expired page reading or redirected to a search engine explaining that 192.168.0.1 is usually a router address.

Any help would be greatly appreciated peeps :)

IIRC the default router IP address after installing DD-WRT is 192.168.1.1 not 192.168.0.1. See if you can access the router using that.

If that doesn't work open a command prompt window, type ipconfig /all and press Enter. Look for the "Default Gateway" entry in the list that gets returned.

1 time only 17-04-2010 17:32

Re: Dlink DIR-615 Firmware Update D2
 
That worked perfect pal :)

However after giving a username as "admin" and no password for the moment I now get a security box asking for pw username and password. But when I put admin and leave the password box blank I get a 401 Unautherized page and it does the same if I leave both blank too.

Maybe I should have stuck to software and not hardware. Lol

Any ideas dude?

*Edit*

Scratch that, I just did a hard reset and all is good.

Thankyou Ed2020 for your help :)

Ed2020 17-04-2010 18:04

Re: Dlink DIR-615 Firmware Update D2
 
You're welcome. Glad your got it sorted. The improvements it brings will make it worth the effort. ;)

mjpartyboy 19-04-2010 14:46

Re: Dlink DIR-615 Firmware Update D2
 
For reference, here is the link to the original VM firmware for the D-Link DIR-615 D2 (v1.00VG):

ftp://ftp.dlink.co.uk/Virgin_Media/F...1.00VG_B02.bin

mjpartyboy 29-04-2010 11:52

Re: Dlink DIR-615 Firmware Update D2
 
Does anybody know where I can find a DIR-615 rev. D D-Link firmware that will allow me to disable CTS Mode?

Doono 29-04-2010 16:02

Re: Dlink DIR-615 Firmware Update D2
 
installing ddwrt will give you that option

mjpartyboy 29-04-2010 21:27

Re: Dlink DIR-615 Firmware Update D2
 
DD-WRT didn't cure the problems I was having, so I've gone back to D-Link's firmware to see how that goes for a while.

mjpartyboy 07-05-2010 08:29

Re: Dlink DIR-615 Firmware Update D2
 
A new build has been released and is recommended in DD-WRT's router database for the DIR-615 D2. It's build 14311.

http://www.dd-wrt.com/site/support/router-database

I've noticed something odd with build 14311 and the DHCP feature though.

I've got my DHCP server to start at a certain range and allow five DHCP addresses with a lease of 720 minutes (12 hours) and the router reboots everyday at 5am, but the last couple of days I've noticed my laptop keeps getting allocated the next address along, even though all previous leases have expired / been released, so for example it was 111.111.1.1 a few days ago, then I noticed it was 111.111.1.2 a couple of days ago and yesterday it was 111.111.1.3. My laptop is the first wireless DHCP device that gets connected to the router when I get in from work.

Welshchris 11-05-2010 15:39

Re: Dlink DIR-615 Firmware Update D2
 
be careful flashing flashing the DIR-615 to 14311.

I tried this to cure my wireless dropping on my 615 and afterwards it wouldnt allow me at all to connect at N speeds only G speeds. i have posted this fact on the forum and a few others have contacted me with identical issues through the forum.

Chrysalis 20-05-2010 01:23

Re: Dlink DIR-615 Firmware Update D2
 
I have decided for now to stick with this firmware (the original one posted on this forum 13435), the performance has turned out fine and stable. I am a bit concerned about all the poor wireless reports (with all the firmware versions) but luckily the router is directly below my laptop so at least in the short term I will be able to use a fully wired network.

hemelvirgin 22-05-2010 16:45

Re: Dlink DIR-615 Firmware Update D2
 
Hi,

i am concerned about me 615 signal range.

Router upstairs at the front of my house i get no coverage outside the back of my house,using a USB N dongle.

Signal drops a lot when downstairs at the back of my house as well ,only 1 floor down.

is there a issue with this router using D2 ?

if this thread is not about this issue ,sorry i will put in a new post

Chrysalis 23-05-2010 01:31

Re: Dlink DIR-615 Firmware Update D2
 
this router according to user feedback seems to have poor wireless performance yes.

mjpartyboy 23-05-2010 17:59

Re: Dlink DIR-615 Firmware Update D2
 
Using D-Link firmware I get an excellent signal throughout the entire house with the router's signal strength set to the lowest option, which is 12.5% if I remember correctly. There are multiple wireless G devices on at once too.

speedfreak 23-05-2010 18:03

Re: Dlink DIR-615 Firmware Update D2
 
Ive got the WRT and Im currently in the garden over 10 meters away (i know this because of the extension lead length) from the router, working fine :)

hemelvirgin 25-05-2010 11:28

Re: Dlink DIR-615 Firmware Update D2
 
Quote:

Originally Posted by speedfreak (Post 35026719)
Ive got the WRT and Im currently in the garden over 10 meters away (i know this because of the extension lead length) from the router, working fine :)

hi,

sorry what is WRT ?


All times are GMT +1. The time now is 10:40.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum