Cable Forum - DPI, Phorm, Webwise subthread for all things OT BR

Page 2 of 4

Show 100 post(s) from this thread on one page

Cable Forum (https://www.cableforum.uk/board/index.php)

- Virgin Media Internet Service (https://www.cableforum.uk/board/forumdisplay.php?f=12)

- - DPI, Phorm, Webwise subthread for all things OT BR (https://www.cableforum.uk/board/showthread.php?t=33635172)

popper

10-07-2008 18:36

Re: DPI, Phorm, Webwise subthread for all things OT BR

see ...#11537

Quote:

Originally Posted by AlexanderHanff (Post 34596644)

It isn't working in VBox or VMWare either. How do you assign exclusive use in VBox?

Alexander Hanff

i just set up a clean Vbox xpsp2 just to be sure, and posting from it right now as it happens ;)

it should be simple assuming you set the USB2 options in that images config settings before you boot the image, then plug your usb device in, and windows doesnt get a look-in as the Vbox has control of the usb now.

just check the Vbox "Devices" "USB devices" and you should see your USB devices, for instance i can see the lads usb scanner and usb sticks etc.

settings/usb/ "Enable USB Controller" and "Enable USB 2.0 Controller" in the Vbox image of your choice should do it before you start it if not.

oh and its probably easyest to set a "shared folder" before you start as well to save and load any files
between the real and emulated OS images....network browsing can be a little flaky to setup ,so a share is easyer...

yep ment to do that rob, but you replyed far to quick for me to move it and put a link in.

AlexanderHanff

10-07-2008 20:49

Re: DPI, Phorm, Webwise subthread for all things OT BR

Quote:

Originally Posted by popper (Post 34596840)

see ...#11537

i just set up a clean Vbox xpsp2 just to be sure, and posting from it right now as it happens ;)

it should be simple assuming you set the USB2 options in that images config settings before you boot the image, then plug your usb device in, and windows doesnt get a look-in as the Vbox has control of the usb now.

just check the Vbox "Devices" "USB devices" and you should see your USB devices, for instance i can see the lads usb scanner and usb sticks etc.

settings/usb/ "Enable USB Controller" and "Enable USB 2.0 Controller" in the Vbox image of your choice should do it before you start it if not.

oh and its probably easyest to set a "shared folder" before you start as well to save and load any files
between the real and emulated OS images....network browsing can be a little flaky to setup ,so a share is easyer...

yep ment to do that rob, but you replyed far to quick for me to move it and put a link in.

Nope it didn't work, the virtual machine is not detecting the device at all despite having USB enabled in virtualbox. I sorted it now anyway by using my inlaw's computer.

Alexander Hanff

popper

11-07-2008 01:43

Re: DPI, Phorm, Webwise subthread for all things OT BR

from ...phorm thread #11555

Quote:

Originally Posted by AlexanderHanff (Post 34597177)

Audio is up on https://nodpi.org

Alexander Hanff

[Edit] Bringing it down for a few minutes to try and fix the rss.

i havent listened to it yet but i noticed staight away putting it though http://www.headbands.com/gspot/ its showing as
22050Hz 128 kb/s , Monophonic

is that 22050 the original files freq, if so its might be very hard to clean it up as theres lots of clipping (loss of high/low information) as might be expected at this freq, if the original is 44000 then it might be doable....

the original was a .WAV container in some mp3 codec i assume !

AlexanderHanff

11-07-2008 01:50

Re: DPI, Phorm, Webwise subthread for all things OT BR

Quote:

Originally Posted by popper (Post 34597228)

from ...phorm thread #11555

i havent listed to it yet but i noticed staight away putting it though http://www.headbands.com/gspot/ its showing as
22050Hz 128 kb/s , Monophonic

is that 22050 the original files freq, if so its might be very hard to clean it up as theres lots of clipping (loss of high/low information) as might be expected at this freq, if the original is 44000 then it might be doable....

the original was WAV container in some mp3 codec i assume !

Well the original was mono hense the 22050Hz (half of a stereo 44100Hz stream) so there is no way to get it any higher (that was the highest quality supported by the voice recorder). I have balanced the file currently on the site so it is played through both speakers as opposed to be truly mono though.

Alexander Hanff

Deko	14-07-2008 13:20

Re: DPI, Phorm, Webwise subthread for all things OT BR

PPL.

Are we going to open a new thread now the original has been closed by the Mod's ?

Shame really.

Russ	14-07-2008 13:34

Re: DPI, Phorm, Webwise subthread for all things OT BR

Quote:

Originally Posted by Deko (Post 34599455)

PPL.

Are we going to open a new thread now the original has been closed by the Mod's ?

Shame really.

No you will not be opening a new thread. It was closed for the reasons stated. If anyone gets any new information we will consider a new thread then, as we will when the AGM takes place. If anyone has an issue with an admin decision they should contact that team member directly.

madslug

14-07-2008 13:53

Re: DPI, Phorm, Webwise subthread for all things OT BR

Quote:

Originally Posted by Deko (Post 34599455)

PPL.

Are we going to open a new thread now the original has been closed by the Mod's ?

Shame really.

My vote is for setting up an independent forum. While there is a lot over at the BT users' forum and Badphorm, neither of those are as rambling as the CF forum was and moving this method of covering the topic to either of them would water them down.

Just my 2p.

Graham M

14-07-2008 13:54

Re: DPI, Phorm, Webwise subthread for all things OT BR

Quote:

Originally Posted by madslug (Post 34599472)

My vote is for setting up an independent forum.

Go for it, good luck on keeping it tidy :) :tu:

Raistlin

14-07-2008 14:07

Re: DPI, Phorm, Webwise subthread for all things OT BR

Quote:

Originally Posted by madslug (Post 34599472)

My vote is for setting up an independent forum.

My understanding is that there already is an independent forum, where most of these discussions are mirrored.

jelv	14-07-2008 14:21

Re: DPI, Phorm, Webwise subthread for all things OT BR

Quote:

Originally Posted by Rob M (Post 34599477)

My understanding is that there already is an independent forum, where most of these discussions are mirrored.

Where?

Much as I understand the reasons, the timing of the closure of the topic just a few days before the protest is very unfortunate.

Would it not be possible for a mod to add a post to the end of the closed topic pointing to the major other places carrying information and/or discussions about Phorm please?

Raistlin

14-07-2008 14:27

Re: DPI, Phorm, Webwise subthread for all things OT BR

The decision to close that thread has been made, 'unfortunate' or not, anything that needed to be said to publicise other sources of information could (and should) have been said whilst it was open - possibly in place of some of the negative, cyclic, unconstructive, posts that have necessitated its closure.

I'll take this opportunity to remind everybody that continued discussion/debate regarding a moderating decision should not be conducted via the forum, if you wish to do so you should take the matter up directly with the Team via PM.

Russ	14-07-2008 14:28

Re: DPI, Phorm, Webwise subthread for all things OT BR

We will review the situation tonight. CF has no desire to silence debate on legitimate topics regarding Phorm.

madslug

14-07-2008 14:38

Re: DPI, Phorm, Webwise subthread for all things OT BR

Quote:

Originally Posted by jelv (Post 34599483)

I believe a mod has been asked to post the link onto the end of the old thread.

For those finding their way here

https://nodpi.org/forum/on-topic/con...-thread/page-1

Russ	14-07-2008 15:11

Re: DPI, Phorm, Webwise subthread for all things OT BR

Guys I have an idea that I feel will benefit all parties, I will post back here early this evening with my suggestion.

---------- Post added at 14:11 ---------- Previous post was at 13:41 ----------

In the meantime if anyone knows how get in touch with Alex can they ask him to PM me please...

Deko	14-07-2008 15:13

Re: DPI, Phorm, Webwise subthread for all things OT BR

@Alex, I tried registering an account but did not get the email ?? on yahoo mail not sure if they binned it !!!

All times are GMT +1. The time now is 06:09.

Page 2 of 4

Show 100 post(s) from this thread on one page