![]() |
Re: Software update in Belfast
So When Do You Englishers Get It ?
|
Re: Software update in Belfast
Quote:
well the dream was good, all worked well, lets hope thats how it turns out :D knowing my luck i wont even be living here when it comes out in my area :( |
Re: Software update in Belfast
8th of June is that a wednesday?
|
Re: Software update in Belfast
On the 3 calendars on my desk it is!!
|
Re: Software update in Belfast
Hi -
I joined this forum just to ask if anyone else in Belfast has this same problem? After the STB software update ( Monday I think ?) the 'mute' button has been rendered useless. Pressing it gives the crossed out speaker icon but volume remains unaffected. However, if you lower volume with the 'minus' button it goes down to zero then displays the sound muted button. Press 'mute' again and the volume goes up to '8 best' instantly. I use NTL for broadband and am happy with the service so digital tv isn't a deal-breaker for me but I think whoever is in charge of the STB software needs a much better beta-testing regime. For me the software gets worse every point update. (e.g. does anyone else have a random 5 - 60 second delay while the STB decides to change to the station they have chosen, I know it isn't the remote as the STB is indicating an action is in progress with the green LED) |
Re: Software update in Belfast
Quote:
If you are using RF then you may have to put up with it. I think the software has been changed to not mute the RF. This is because most people use the RF either for connection to a VCR or to a second TV in another room. In either case, you wouldn't want it to mute. But due to hardware differences, the exact behaviour varies between the STB models. Which one do you have? |
Re: Software update in Belfast
Hi Spiderplant.
Thanks for the response. My setup is as follows: STB to VHS to TV The STB is connected to the video using a coaxial cable (old fashioned plastic coated twisted wire ? ). I have scarts but just never bothered as everything worked fine. The STB is PACE - HW Type 4010, HW version P3.82 I will switch to scart cables later and report back. |
Re: Software update in Belfast
The 'slowness'of the box to respond could be caused by bad signals.If you also dont have a return path,VOD WONT work!
To check for a return path,press page up/down/blue buttons,Go to page 3 & under conn status it should say '5 conn (or 5 connected, i live near Bangor so i dont have NTL!). if it does,your in luck!From what a gathered in the training,VOD is (if all goes well!) better than Sky+.You'll be able to watch last nites 'Eastenders,Download pop music videos (like asking for one on MTV,but without the wait!)Watch the latest front row films as many times as you want over a 24 hr period for only £3.50!P lonk the carpet sharks down in front of the tv & watch the ENTIRE series (shoot me...PLEASE!!!!) of Teletubbies!( how come,whenever i go to a job )on a STB,Teletubbies are always ON!!!)Sounds better than Sky+.We'el have to see, Spike |
Re: Software update in Belfast
The slowness could also be caused by infra-red interference being picked up the STB.
Make sure you have none of the following shining onto the STB: - sunlight - energy-saving bulbs - fluorescent tubes - plasma TVs - LCD TVs Quote:
|
Re: Software update in Belfast
Quote:
Browneggsandham :) |
Re: Software update in Belfast
Quote:
Stop nitpicking,it's only a b***** tv! |
Re: Software update in Belfast
Quote:
Sky+ lets you record whatever you want, off TV, and then watch it back at a later date. VoD gives you a set selection of movies, TV shows, music videos etc, stored on a server, which you can choose to watch, often for a small fee, whenever you want. Browneggsandham :) |
Re: Software update in Belfast
Quote:
Even if NTL increased the VOD content by a factor of ten and made it all free it still wouldn't tempt me to drop Sky+ in favour of it. |
Re: Software update in Belfast
Quote:
|
Re: Software update in Belfast
anymore on this?
|
| All times are GMT. The time now is 08:26. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum