![]() |
Re: DVD writers
my LB +- /RAM drive arrived today.. it's an OEM version which is fine as i've got IDE cables and have a screwless case. Will install it over the next few days and let you know what i think
|
Re: DVD writers
I`ve noticed a lot of these OEM writers out there and they are a lot cheaper but what I want to know is, exactly what will I need to install one in my pc. I`ve got a spare bay and when I looked inside my pc, the ide cable that goes to the drive that I`ve already got has a spur coming off it.
|
Re: DVD writers
basically OEM is what the manufacturers buy.. it's just the drive itself.. no screws.. no cables.. no software etc.. you can run 2 drives off one IDE cable with the spur you have noticed.. just set one to master one to slave.. it's quicker to use a seperate IDE cable but your motherboard might not have any spare slots.. you will need to get the screws to put it in the slot.. most cases come with spares if not i'm sure you can take one out and take to a DIY shop and get some.. you will need to get the burning software some places sell these with the OEM version but most don't so be carefull..
|
Re: DVD writers
Any drivers you need can be downloaded from the manufacturers site. If you are replacing a CD drive then you already have all the screws etc.
OEM stands for Original Equipment Manufacturer. |
Re: DVD writers
Thanks, as I`ve already got burning software, Nero and Sonic recordnow, all I need then are screws, which I can take out of an old scrap pc that I`ve got upstairs.
Cheers. |
Re: DVD writers
*** Update Update ***
Check out the Hitachi / LG GSA-4120B available from Scan for £68 + delivery + VAT. Quote:
|
Re: DVD writers
Quote:
dual layer for that price :Yikes: , me wonders how pcworld manage to charge a seemingly rip off £150 for a sony dual layer writer :shocked: |
Re: DVD writers
Can any1 recommend the best value media for a NEC 1300A to burn mpeg's etc 2 play on a TV DVD player. I've Been looking on Ebuyer , they've got 25 Infiniti white top DVD-R's for just under a tenner; but I'm unsure whether its worth paying the extra for Verbatim disks - seen a 5 pack of DVD-R's for £3 in the 'The Computer Shop'.
cheers Edit: Ebuyer link doesn't work 4 some reason http://www.ebuyer.com/customer/produ...=ASC&offset=30 |
Re: DVD writers
Get your media from Blankdiscshop.co.uk. Highly recommended. I can't recommend what type of media you should get for your burner, sorry. But ritek and ridata or ridisc should be ok.
|
Re: DVD writers
Is dual layer better then? From reading what I have so far, I think I too will go for the LG one from Scan, it's OEM but hopefully I can get the screws and download all necessary drives from the manufactorers website, I've got burning software also. Very usefull thread this one.
|
Re: DVD writers
personally id be happy to wait for a dual layer, but not till the speed of its burning picks up. From what i recall the fastest burn time for a full dual layer is something around 80 minutes!!! (Im hoping thats wrong).
Anyway for me its still early, and unless your backing up movies without either cutting bits out or reducing quality to fit onto a single dvd, theres not much else. Till then im gonna get a pioneer 107 :) |
Re: DVD writers
I still can't decide between the LG 4120BB OEM Ivory DUAL LAYER DVD-Writer or the Pioneer 107 :confused:
|
Re: DVD writers
Quote:
The first CD writers were limited by the computers that ran them; it took a comparatively large amount of horsepower to be able to calculate all the error correction and stuff needed for a CD, and of course any burner needs a constant stream of data or you've got a coaster on your hands. Since then, computers have got much more powerful, memory has got cheaper (so CD writers can have built-in caches) and the situation has improved to such a degree that you can write a CD at 52 speed (52 times standard audio CD speed being roughly the fastest you can spin a CD without the g-forces warping it too much to make it readable). It's taken a while for the media to catch up though. A recordable CD is in simple terms a thin layer of very special material sandwiched between two layers of transparent plastic. This material is special because it has the property that when you fire a laser of a particular frequency at it, it will melt and chrystalise in a different way, thus changing the reflective properties. CD-RWs are even cleverer, because they'll change back again if you fire a different frequency at them. The difficulty has been in the chemistry of finding a material that will change over in the incredibly brief laser flash of a 52x burn. I think the best they're up to now is 48x, and that's probably the best there'll ever be now that the focus has changed to DVDs. I think it's probably the chemistry that kept 8x burners from the market for so long. DVDs spin much faster and have far smaller pits than CDs, making the task more difficult. Four a dual-layered device, you'd need effectively 4 chemical states for every pit on the DVD... well, you can see the difficulty. |
| All times are GMT. The time now is 05:03. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum