![]() |
Re: Recent Spell of problems
Quote:
|
Re: Recent Spell of problems
I had so much trouble with the Pace 4000. Downgraded to a 1000 and have had no problems since.
|
Re: Recent Spell of problems
The reason some people might have problems with the 4000 is because of the extra power it needs but I am actually having difficulty with the software on these boxes. Anyone know anything about a faulty batch of 1000's?
|
Re: Recent Spell of problems
Just spoke to the technial dept and they are going to come out on Tuesday. So if anyone could pull any strings to make sure they come and fit two new RG11 cables, a new STB, a new drop box and some riser guard. I will be most happy :) lol.
|
Re: Recent Spell of problems
Hi,
Just to update you all. The engineer came out yesterday and said that the installation was terrible and we are having a crew out tomorrow morning to install an RG11 cable. Could someone please advice me the signal difference between RG6 and RG11 and if we will need 1 or 2 RG11 feeds. We are >100m from the CAB and have: 1x Telephone Line / 3 STB's / 1 SACM We have VERY low signal on 1 of the current RG6 feeds (two way splitter) 1 SACM and 1 STB. The signal is not as bad on the other RG6 feed but there is still problems with the quality of picture on the other two STB. |
Re: Recent Spell of problems
Lets hope they get your problem sorted out once and for all. Make sure you keep us updated :)
|
Re: Recent Spell of problems
Will do but if anyone can help me with my above questions id be most grateful!
Thanks, Andrew |
Re: Recent Spell of problems
RG11 is fatter and has less attenuation than RG6 - details here (under coaxial cables):
http://bwcecom.belden.com/catalog/techinfo/techinfo.htm |
Re: Recent Spell of problems
altis, do you think I will need two runs of RG11 or just 1? going on the details above?
|
Re: Recent Spell of problems
Haven't a clue mate. But I would guess that it's not necessary to run two. You'll need a 4-way splitter for all that lot which will introduce 6dB of loss but the installer should have plenty of taps to play with in the cabinet to compensate for this.
|
Re: Recent Spell of problems
The service guys can fit what we call an HDU and it is a 4way powered signal booster that is fitted in the omni box outside the house so there is no signal loss everytime the signal is split, ie: losing 3.5dB through every split. This is a common problem which installers never address. More often than not they just disconnect another box to get the SACM working. With an rg11 you should gain about 5-6 dB over an 100m drop at 746mhz
|
Re: Recent Spell of problems
Hi,
They came out this morning and fitted an RG11 and an RG6. The RG11 is split 3 ways (2x STB, 1x SACM) and the RG6 is on a barrel (1x STB). They said the installation was a joke and almost every connection wasnt right. So we now have excellent signal in the house on all items so im pleased about that :) Top marks to the people which came out !!! Unfortunately they did not have a spare STB on the van to exchange the 1000 im having problems with but they had a look and it says "tuning parameters corrupt" in the box logs. Does anyone know anything about this error, and if/how it can be got round? The box tends to freeze a lot. |
Re: Recent Spell of problems
Quote:
HTH. |
Re: Recent Spell of problems
Neil thanks for that... I have seen the error on that screen but it doesnt explain what it means? unless im being blind.
|
Re: Recent Spell of problems
Firstly thanks for your patience, it's nice to read a well-written comprehensive explanation of problems. Installations gone bad is something we're very interested in.
If you can drop me a PM with any of your details on it (any of the STB MAC addresses or IP addresses or smart card numbers) I can check them remotely. I'll be able to see which one's the 1000 quite easily. Quote:
|
| All times are GMT. The time now is 15:46. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum