Cable Forum - 125M Vmng300

Page 19 of 57

« First

Last »

Show 100 post(s) from this thread on one page

Cable Forum (https://www.cableforum.uk/board/index.php)

- Virgin Media Internet Service (https://www.cableforum.uk/board/forumdisplay.php?f=12)

- - 125M : Vmng300 (https://www.cableforum.uk/board/showthread.php?t=33676152)

carbon60

05-04-2011 19:04

Re: Vmng300

Quote:

Originally Posted by General Maximus (Post 35207072)

I dont know dude, when i got both my linksys routers I made some changes to the wireless settings, mac filtering, ip addressing, port forwarding etc etc

Fair enough, from what I recall Masque turned off IPFlood detection and the Firewall which you should not have to do.

Peter_

05-04-2011 20:05

Re: Vmng300

Quote:

Originally Posted by carbon60 (Post 35207050)

You stated that you turned off a couple of things when you had it. If it worked properly you wouldn't have had to make those adjustments, it should have just worked out of the box.

All I have ticked in services are the following 2 items.

Ipsec PassThrough Enable PPTP PassThrough Enable

---------- Post added at 21:05 ---------- Previous post was at 21:02 ----------

Quote:

Originally Posted by Chrysalis (Post 35207077)

alot of people tune routers however all my other routers dont have wireless actually dropping out on defaults. maybe reduced performance but that be it.

masque did more than tuning, he connected a 2nd router to it.

I connected the Edimax as an Access Point on the end of a long ethernet cable to increase overall coverage in the house and my daughters laptop uses either device.

Many others have done the same but I have both networks in use.

carbon60

06-04-2011 09:26

Re: Vmng300

Quote:

Originally Posted by Masque (Post 35207149)

All I have ticked in services are the following 2 items.

Ipsec PassThrough Enable PPTP PassThrough Enable

---------- Post added at 21:05 ---------- Previous post was at 21:02 ----------

That doesn't correspond to what you stated here:

http://www.cableforum.co.uk/board/12...l#post35201284

Quote:

I logged in and went to advanced settings and unticked firewall and ipflood and it works fine.

pip08456

06-04-2011 11:17

Re: Vmng300

Quote:

Originally Posted by carbon60 (Post 35207361)

That doesn't correspond to what you stated here:

http://www.cableforum.co.uk/board/12...l#post35201284

A bit pedantic don't you think?

If he unticked IP flood and the firewall then the other 2 would remain ticked.
Therefore he only has those 2 ticked.

carbon60

06-04-2011 11:34

Re: Vmng300

Quote:

Originally Posted by pip08456 (Post 35207418)

A bit pedantic don't you think?

If he unticked IP flood and the firewall then the other 2 would remain ticked.
Therefore he only has those 2 ticked.

I'm not sure I understand what you mean, I don't have a SuperHub (thankfully) and so don't know every option it has.

Having to untick something like the firewall demonstrates a fault with the product. Masque says he has had no problems with the SuperHub. If there were no problems there would be no need to deactivate the firewall.

pip08456

06-04-2011 12:15

Re: Vmng300

I don't denyu there's a fault with the product.

I was merely commenting on your post which inferred Masque was contradicting his earlier post.

He wasn't.

carbon60

06-04-2011 14:03

Re: Vmng300

Quote:

Originally Posted by pip08456 (Post 35207478)

I don't denyu there's a fault with the product.

I was merely commenting on your post which inferred Masque was contradicting his earlier post.

He wasn't.

Ok, clearly I don't understand what you mean. I thought that the IPflood and firewall options would be separate to the two VPN settings that Masque mentioned.

_wtf_

06-04-2011 14:34

Re: Vmng300

I can no longer see my modem settings on 192.168.100.1

Mick Fisher

06-04-2011 14:41

Re: Vmng300

Quote:

Originally Posted by _wtf_ (Post 35207541)

I can no longer see my modem settings on 192.168.100.1

Try rebooting it or stop using a proxy. ;)

_wtf_

06-04-2011 15:14

Re: Vmng300

Quote:

Originally Posted by Mick Fisher (Post 35207547)

Try rebooting it or stop using a proxy. ;)

LOL, connected to works VPN

Peter_

06-04-2011 18:18

Re: Vmng300

Quote:

Originally Posted by carbon60 (Post 35207361)

That doesn't correspond to what you stated here:

http://www.cableforum.co.uk/board/12...l#post35201284

No that is exactly what I have done except I only have the 2 items above ticked and it works fine for me.:rolleyes:

craigj2k12

06-04-2011 18:36

Re: Vmng300

calm down ladies.

we all know that there are problems with regards to packet loss when using the ip flood detection, and that there are browsing problems when using the firewall.

When using vpn, I found that mine only worked when PPTP passthrough was unticked. it says in the description that when it is ticked it allows PPTP traffic through, but I found that it only let the traffic through when it was unticked. you have to remember though, that there are hundreds of different ways of connecting to a VPN server, and everyone will use different settings and different software, and settings on the superhub that work for some may not work for others!

Peter_

06-04-2011 18:37

Re: Vmng300

Quote:

Originally Posted by craigj2k11 (Post 35207761)

As I do not use VPN the is no need for me to untick it.:D

craigj2k12

06-04-2011 18:45

Re: Vmng300

Quote:

Originally Posted by Masque (Post 35207763)

As I do not use VPN the is no need for me to untick it.:D

dont untick it then. but the information might have been useful for the peeps above who do use VPN!! :D

capt coax

06-04-2011 21:08

Re: Vmng300

hit it with a hammer :)

i love "my precious"

All times are GMT. The time now is 09:29.

Page 19 of 57

« First

Last »

Show 100 post(s) from this thread on one page