Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Virgin Media Internet Service (https://www.cableforum.uk/board/forumdisplay.php?f=12)
-   -   Superhub : Just got the SuperHub 3 (https://www.cableforum.uk/board/showthread.php?t=33701728)

nator 02-02-2016 16:36

Re: Just got the SuperHub 3
 
Quote:

Originally Posted by ianch99 (Post 35819992)
Assuming the SH3 is working as intended, what are the advantages of the device relative to the SH2ac on a current residential 200Mbps tier, for example? I don't mean what it can do in the future or the internal implementation differences, I mean an end-user experience difference. Curious ..

Currently not working as inteded here.. Buggy interface, UPnP doesn't work and can't forward ports (well, I can't seem to, anyway..). If your current setup is working ok I would not be in a rush to get one.

Big Dave B 02-02-2016 17:46

Re: Just got the SuperHub 3
 
I'm on my 2nd day with SH3 after upgrading to 150mbps.

My ping has gone from usually being under 10ms (wired) and under 15ms (wifi) to around 30-40ms in both cases; my download speed is still around 80-90mbps (wired); but my upload speed has increased from ~5 to ~9 meg.

On top of that I tried using the hub as a router but it was painfully slow (we use multiple HD media players around the house) so I've gone back to my trusty £20 tp-link router.

I'm not particularly impressed so far.

heero_yuy 02-02-2016 18:06

Re: Just got the SuperHub 3
 
I'm just surprised that anybody is surprised.

BTW Welcome Big Dave B. Nice to have you on board. :tu:

knack 02-02-2016 18:32

Re: Just got the SuperHub 3
 
Upgraded to 200Mb and received superhub.

Was wondering whether I'd get SH 3 or SH 2ac but have actually received SH 2. I'd have thought that they would be issuing 2ac or 3 only now.

I have ac devices which is why I'm posting about this. Anyone know if they'll swap if I contact them? Alternative is a new ac router which I had been considering.

Synthetic 02-02-2016 18:51

Re: Just got the SuperHub 3
 
I think if I was offered a SH2 to replace my SH3, I'd take it...

Synthetic 03-02-2016 21:40

Re: Just got the SuperHub 3
 
Our SH3 has been a bit crap tonight, wifi dropping in and out, speeds all over the place.

Power levels are still fine, no errors in the log, reboot seems to have calmed it down but my phone is still dropping out, so is my flatmates...

MUD_Wizard 03-02-2016 22:18

Re: Just got the SuperHub 3
 
Quote:

Originally Posted by knack (Post 35820131)
Upgraded to 200Mb and received superhub.

Was wondering whether I'd get SH 3 or SH 2ac but have actually received SH 2. I'd have thought that they would be issuing 2ac or 3 only now.

I have ac devices which is why I'm posting about this. Anyone know if they'll swap if I contact them? Alternative is a new ac router which I had been considering.

https://www.cableforum.co.uk/images/...2016/02/28.jpg

---------- Post added at 23:18 ---------- Previous post was at 23:13 ----------

Quote:

Originally Posted by Kushan (Post 35820090)
There's absolutely no need to go killing yourself to get a SH3 if you have a SH2 right now. Even bonding extra channels isn't going to make a difference on your 200mbit connection,

That's debatable. Say that when they take away half your channels. It makes no sense, unless you always get 200Mb 24/7, as bandwidth is distributed across the channels.

Quote:

Originally Posted by Kushan (Post 35820090)
you'll either get your 200mbit or your area will be congested and you won't.

Naturally, but that argument can't be used to negate the usefulness of channel bonding.

pip08456 04-02-2016 07:28

Re: Just got the SuperHub 3
 
Quote:

Originally Posted by MUD_Wizard (Post 35820323)
Naturally, but that argument can't be used to negate the usefulness of channel bonding.

Correct, but it can be used to negate the usefulness of the SH3 in it's present state.

MUD_Wizard 04-02-2016 15:39

Re: Just got the SuperHub 3
 
Quote:

Originally Posted by pip08456 (Post 35820345)
Correct, but it can be used to negate the usefulness of the SH3 in it's present state.

Depends what you need it for. My SH3 works fine for me, but then I only use it for wifi. If I just wanted it to handle the load better for 200Mb then I'd have one over a SH2ac (probably). For any other purpose that requires something complicated like port-forwarding, upnp etc I'd recommend a SH2ac for now.

Good job I have both plus a shiny new Hitron. :D

toady 04-02-2016 16:33

Re: Just got the SuperHub 3
 
Quote:

Originally Posted by MUD_Wizard (Post 35820323)

So nice to see them looking after their loyal customers on the top tier by giving them the oldest model

MUD_Wizard 04-02-2016 16:37

Re: Just got the SuperHub 3
 
Quote:

Originally Posted by toady (Post 35820475)
So nice to see them looking after their loyal customers on the top tier by giving them the oldest model

I believe it's a temporary situation.

pip08456 04-02-2016 21:02

Re: Just got the SuperHub 3
 
Quote:

Originally Posted by toady (Post 35820475)
So nice to see them looking after their loyal customers on the top tier by giving them the oldest model

Where does it say top tier uses will get the SH1? That is after all their oldest model.

Gobble 05-02-2016 07:19

Re: Just got the SuperHub 3
 
Quote:

Originally Posted by MUD_Wizard (Post 35820477)
I believe it's a temporary situation.

Still, surely that's a typo and is meant to be the other way round? :erm:

Synthetic 05-02-2016 08:03

Re: Just got the SuperHub 3
 
Wondering when they're gonna roll out a decent firmware to us who aren't trialists, but stuck on this buggy version

Ken W 05-02-2016 08:25

Re: Just got the SuperHub 3
 
Quote:

Originally Posted by Synthetic (Post 35820592)
Wondering when they're gonna roll out a decent firmware to us who aren't trialists, but stuck on this buggy version


Any idea what version of firmware VM are installing?


All times are GMT. The time now is 23:01.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum