![]() |
Re: Superhub is nowhere near as bad as people say!
One of the reported "faults" with the SH was the power adaptor making a noise. With it having Netgear on it looks like that's what you've got.
Reason, again reported and my own experience, the tech comes, unplugs the mdoem and plugs everything into the SH including the power adaptor that was in use. I'll have a look at mine shortly (bit unaccessable ATM) and post the specs back. |
Re: Superhub is nowhere near as bad as people say!
https://www.cableforum.co.uk/images/...2011/04/11.jpg
---------- Post added at 14:54 ---------- Previous post was at 14:53 ---------- Quote:
|
Re: Superhub is nowhere near as bad as people say!
Quote:
|
Re: Superhub is nowhere near as bad as people say!
Quote:
|
Re: Superhub is nowhere near as bad as people say!
ok so + and 10v thanks.
yeah the plug I got here that came with it is + and 12v so I am over volting it. netgear label, same plug as superhub. |
Re: Superhub is nowhere near as bad as people say!
Quote:
|
Re: Superhub is nowhere near as bad as people say!
Quote:
|
Re: Superhub is nowhere near as bad as people say!
I don't think it matters too much with the vmng300 as the psu we got with them was the same as the ambit 256 but I'm sure the old psu we got was 12v
---------- Post added at 17:25 ---------- Previous post was at 16:52 ---------- The vmng300 uses a 12v psu so the netgear is the correct one, apologies it's been a while since I installed one |
Re: Superhub is nowhere near as bad as people say!
Quote:
|
Re: Superhub is nowhere near as bad as people say!
So the superhub is capable of 320 Mbps max then going by those chip specs. That is probably with the CPU just being used as a CM, not all the extra stuff VM are asking it to do too. So once 300+ is rolled out the SH will be obsolete :p
|
Re: Superhub is nowhere near as bad as people say!
Once 100 goes to 8 channels the ambit should be obsolete
|
Re: Superhub is nowhere near as bad as people say!
Quote:
|
Re: Superhub is nowhere near as bad as people say!
Sorry for the late repost Chrys, got involved with someting else and forgot!:dozey:
My recollections were correct. The VMNG uses a 12V adaptor the SH 10V Here's my orignal adaptor for the VMNG300. (currently being used for the SH with no problems.). https://www.cableforum.co.uk/images/local/2011/04/7.jpg ---------- Post added at 21:38 ---------- Previous post was at 21:36 ---------- Quote:
---------- Post added at 21:38 ---------- Previous post was at 21:38 ---------- Quote:
|
Re: Superhub is nowhere near as bad as people say!
Doubt vm will pay for the ambit firmware update, superhub also uses 12v. Only old modems use 10v
|
Re: Superhub is nowhere near as bad as people say!
Quote:
The Superhub on the otherhand is awaiting R27 in a couple of months.http://www.addemoticons.com/emoticon...icons04257.gif |
| All times are GMT. The time now is 08:34. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum