![]() |
Re: [Update] ALL 20>30Mb upgrade discussion
Quote:
Then at least i would get a higher speed up & down with bt infinity. |
Re: [Update] ALL 20>30Mb upgrade discussion
Quote:
The cable modem automatically locates and downloads a config file as instructed by the network infrastructure each and every time it boots up as part of the startup process. |
Re: [Update] ALL 20>30Mb upgrade discussion
Quote:
|
Re: [Update] ALL 20>30Mb upgrade discussion
Quote:
|
Re: [Update] ALL 20>30Mb upgrade discussion
even firmware updates will be delivered this way as well, so in the past when you choose what firmware to run on router (new one may be buggy), now VM will shove the firmware out over the network when they want to upgrade people and the superhub will automatically update itself with new firmware.
|
Re: [Update] ALL 20>30Mb upgrade discussion
Quote:
|
Re: [Update] ALL 20>30Mb upgrade discussion
Quote:
|
Re: [Update] ALL 20>30Mb upgrade discussion
Quote:
How have you gone from me talking about holding your hand automated firmware updates to new firmware development? I also wasnt complaining about it but you in full defense paranoia mode. The new firmware if and when it comes will have bugs, its a fact of life, I have yet to come across a router that has bug free firmware, however it is a downside for the user to not have the ability to rollback firmware should they need to which is all I was stating. |
Re: [Update] ALL 20>30Mb upgrade discussion
Had mine activated before and i'm getting rock solid 30mbit :)
https://www.cableforum.co.uk/images/...011/02/105.png Are the levels ok tho? Connection Startup Procedure Procedure Status Comment Acquire Downstream Channel 314750000 Hz Locked Connectivity State OK Operational Boot State OK Operational Configuration File OK Security Enabled BPI+ Downstream Channels Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power SNR Docsis/EuroDocsis locked Locked QAM256 117 55616000 Kbits/sec 314750000 Hz 8.8 dBmV 41.2 dB Hybrid Locked QAM256 115 55616000 Kbits/sec 298750000 Hz 8.3 dBmV 41.3 dB Hybrid Locked QAM256 116 55616000 Kbits/sec 306750000 Hz 8.4 dBmV 41.4 dB Hybrid Locked QAM256 118 55616000 Kbits/sec 322750000 Hz 9.0 dBmV 41.6 dB Hybrid Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown Upstream Channels Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power Locked ATDMA 2 20480 Kbits/sec 35800000 Hz 35.7 dBmV Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV Primary Downstream Service Flow Downstream(0) SFID 21546 Max Traffic Rate 33330000 bps Max Traffic Burst 3044 bytes Mix Traffic Rate 0 bps Primary Upstream Service Flow Upstream(0) SFID 21541 Max Traffic Rate 3333000 bps Max Traffic Burst 8160 bytes Mix Traffic Rate 0 bps Max Concatenated Burst 8160 bytes Scheduling Type Best Effort Current System Time:Mon Feb 07 17:18:07 2011 That is with that module on the front of the cable, +5 or 6 i think it is |
Re: [Update] ALL 20>30Mb upgrade discussion
Why not have users volunteer to be beta testers for the firmware, this has been the way forward for firefox.
I have been a beta tester all the way through with firefox 4,advantages are you get to use the new stuff first. There are disadvantages too but its the only way to get software or even firmware running properly. |
Re: [Update] ALL 20>30Mb upgrade discussion
Quote:
|
Re: [Update] ALL 20>30Mb upgrade discussion
VM's firmware updates are trialled through their community forums. There is currently a trial for the R09 firmware of the previous Hub ongoing at present for example.
|
Re: [Update] ALL 20>30Mb upgrade discussion
Quote:
|
Re: [Update] ALL 20>30Mb upgrade discussion
Quote:
I dont see VM asking for testers anywhere. |
Re: [Update] ALL 20>30Mb upgrade discussion
Quote:
As was said above the current customer testing is for the D2 Hub to fix the multiple Xbox issue (that doesn't affect the SuperHub) http://community.virginmedia.com/t5/...ot/td-p/288607 |
| All times are GMT +1. The time now is 10:23. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum