View Full Version : RF modulated output channel
My digital boxes output is the same frequency as channel 4. Does anyone know how change RF modulated output channel?
Thanks
badnbusy
30-12-2003, 14:02
You can do that from the Engineers menu. (at your own risk!).
To get to the engineers menu, reboot the STB, and hold the UP+DOWN keys in, until the blue menu appears (after the four ----'s appear on the box)
Then scroll through the pages with the left/right arrow keys and use up and down to change the RF channel :)
ntltech32
30-12-2003, 17:27
Worked a treat
Thanks
You can do this from the Engineers ONLY menu. (at your own risk!)
To get into the menu, power down the STB, and hold the UP+DOWN keys until 4 ----'s appear on the display it should then a few seconds later appear as DIAG (release keys)
if it has not already switched to av do so then a blue menu will appear on page 1 goto RF press select and change to 59 this is the default.. press select and services to store. Power down and reboot .
Please remeber this is at your own risk and playing about can lose the default freq's, quams etc and bugger your box until a tech comes out to reset for you a nice call out fee of £50
dodgyboy
30-12-2003, 17:58
Just for info:
On Bromley CR3 STB's the RF can be chnaged from the front of the STB
1000/2000 stb, hold ok, right arrow and press TV (the RF freq wil display on the STB display).
Then use channel +/- to change the RF channel.
Hold ok, right arrow and press TV to confirm the change.
4000 stb, Hold- Vol+, Select and press services (the RF freq wil display on the STB display)
Then use channel +/- to change the RF channel.
Hold- Vol+, Select and press services to confirm the change.
:spin:
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.