Signal Levels

[shnookumshnum]

The signal levels link is dead
Where else can I test my signal levels?

[SnoopZ]

The ussual place works fine for me. http://192.168.100.1/

[Web-Junkie]

Just checked mine and Download Power is 10dBmv! Upstream seems to be bordering on high too according to the Signal Level Sticky!

Surboard 4100 in NG17 area, is this OK?

Frequency: 402750000 Hz Locked
Signal to Noise Ratio: 36 dB
Power Level: 10 dBmV

The Downstream Power Level reading is a snapshot taken at the time this page was requested. Please Reload/Refresh this Page for a new reading

Upstream Value Channel ID: 4
Frequency 36800000 Hz Ranged
Power Level: 54 dBmV

I can't say I'm having any problems surfing/downloading yet, but is it a cause for concern?

[Cerberus]

This may be a little off topic here, apologies if it is. I have a NTL 250 SACM and I have just entered the admin page. In the event log i found the following:

Wed Feb 01 20:37:55 2006 Wed Feb 01 20:37:55 2006 1 Critical(3) 82000500 Started Unicast Maintenance Ranging - No Response received - ... Time Not Established Time Not Established 8 Critical(3) 68000300 DHCP WARNING - Non-critical field invalid in response. Fri Jan 06 19:34:27 2006 Fri Jan 06 19:34:27 2006 1 Critical(3) 82000500 Started Unicast Maintenance Ranging - No Response received - ... Time Not Established Time Not Established 2 Critical(3) 68000300 DHCP WARNING - Non-critical field invalid in response. Time Not Established Time Not Established 2 Critical(3) 82000200 No Ranging Response received - T3 time-out Time Not Established Time Not Established 1 Critical(3) 82000300 Init RANGING Critical Ranging Request Retries exhausted Time Not Established Time Not Established 17 Critical(3) 82000200 No Ranging Response received - T3 time-out Time Not Established Time Not Established 1 Critical(3) 84000200 SYNC Timing Synchronization failure - Failed to acquire FEC f... Time Not Established Time Not Established 82 Critical(3) 84000100 SYNC Timing Synchronization failure - Failed to acquire QAM/Q...

Can anyone tell me what all this means and if I have some seriuos problems with my sacm config or service?

Thanks in advance.

[shnookumshnum]

The site just says unauthorised when I try to login

[Web-Junkie]

The link is working for me. Logout of the forum and log back in and see if that helps!

[iain_herts]

username and pass are root / root

[shnookumshnum]

Hi All got that link working and came up with this:

Downstream Lock : LockedDownstream Channel Id : 1Downstream Frequency : 586750000 HzDownstream Modulation : QAM64Downstream Symbol Rate : 6952 Ksym/secDownstream Interleave Depth : taps12Increment17Downstream Receive Power Level : 2.6 dBmVDownstream SNR : 34.8 dB
I have no idea what these mean but yet I lose my connection for no reason does anyone out there know If I need assistance??

[BBKing]

Well, it won't be because of your downstream, those are perfect. The upstream might be a different matter, and unfortunately you can't check that. I can if I know your MAC address though.

[shnookumshnum]

mac: 00:0e:9b:xx:xx:xx

On the network connection for the modem, the packets sent field is always 0 - does anybody know why this could be?? Or if it could be a problem??


Edit (Paul) : MAC edited, please don't post full MAC addresses on the public forum, send it in a PM

[Rik]

Argh!!!

Dont post the whole MAC address fella!!

Perhaps a nice editor/moderator will remove some?

[BBKing]

Private Message me your mac, mate.