PDA

View Full Version : Power Levels


PAYNEARDO
17-04-2008, 22:44
Hi, all sorry for another help post but can you confirm my power levels are fine :)

Had a couple of problems but all seem fine now

Cable Modem Downstream
Downstream Lock : Locked
Downstream Channel Id : 7
Downstream Frequency : 331000000 Hz
Downstream Modulation : QAM256
Downstream Symbol Rate : 5360.537 Ksym/sec
Downstream Interleave Depth : taps32Increment4
Downstream Receive Power Level : 0.6 dBmV
Downstream SNR : 40.8 dB



Cable Modem Upstream
Upstream Lock : Locked
Upstream Channel ID : 1
Upstream Frequency : 25800000 Hz
Upstream Modulation : QPSK
Upstream Symbol Rate : 2560 Ksym/sec
Upstream transmit Power Level : 50.0 dBmV
Upstream Mini-Slot Size : 2



Cheers

Payneardo

Axegrinder
17-04-2008, 23:28
Theyre all good :tu:

PAYNEARDO
18-04-2008, 08:09
cheers m8 :)

Acathla
19-04-2008, 00:33
Sorry for thread hijacking, but rather than starting a new one...

I have become rather sick of my 20meg VM connection. Maximum I have ever got is about 11meg connected direct to modem. People keep giving indication that maybe power levels are to blame so I would appreciate it if you can run your experienced thoughts through my numbers and see if you think getting a tech out may improve the situation?

Downstream Lock : Locked
Downstream Channel Id : 0
Downstream Frequency : 586750000 Hz
Downstream Modulation : QAM64
Downstream Symbol Rate : 6952 Ksym/sec
Downstream Interleave Depth : taps12Increment17
Downstream Receive Power Level : -8.7 dBmV
Downstream SNR : 36.2 dB

Upstream Lock : Locked
Upstream Channel ID : 4
Upstream Frequency : 46200000 Hz
Upstream Modulation : QAM16
Upstream Symbol Rate : 2560 Ksym/sec
Upstream transmit Power Level : 61.0 dBmV
Upstream Mini-Slot Size : 2

I am ex-ntl and on the Bagley network.

Many Thanks.

moaningmags
19-04-2008, 00:56
Upstream transmit Power Level : 61.0 dBmV




That power level is way too high. You need a tech visit.

HTH
Mags

Acathla
19-04-2008, 14:06
Thanks Mags. Put some info on the newsgroups so hopefully someone will pick it up.

Fingers crossed it can be fixed and I can watch my speeds rocket ;)

xspeedyx
19-04-2008, 14:39
Are mine Ok?

Downstream Status
Operational
Channel ID
7
Downstream Frequency
339000000 Hz
Modulation
256QAM
Bit Rate
20480000 bits/sec
Power Level
0.3 dBmV
Signal to Noise Ratio
38.2 dB


Upstream Status
Operational
Channel ID
3
Upstream Frequency
37500000 Hz
Modulation
QPSK
Bit Rate
768000 bits/sec
Power Level
53.0 dBmV

moaningmags
19-04-2008, 15:24
Are mine Ok?

Power Level
53.0 dBmV

At the moment yes, but I'd keep an eye on the upstream power level.
If it goes much higher it may impact on your connection.

Mags

Axegrinder
19-04-2008, 17:18
Also check that the cable connections are tight, i was at my dads and he was complaining about slow internet connection (400K on 2mb service), checked the power levels, to find the upstream was at 58-61 dbmv. Tighteded the cable at both ends and it sunddenly dropped to a much better 43 dbmv, and he is now gettign the full 2mb. ;)