PDA

View Full Version : Please Could Someone from virgin media or a guru please look


DancingBrave
06-03-2008, 01:20
Hello Ladies and Gentlemen

I have been with ntl/virginmedia for many years no problems but the last 3-5 months i have been having quite afew problems, its nearly impossible to play online games allways get disconnected !!! and the internet trying to watch youtube videos is another no no,,,,

i have removed the router makes no difference i am on the 20mb broadband

Cable Modem Downstream
Downstream Lock : Locked
Downstream Channel Id : 51
Downstream Frequency : 586750000 Hz
Downstream Modulation : QAM64
Downstream Symbol Rate : 6952 Ksym/sec
Downstream Interleave Depth : taps12Increment17
Downstream Receive Power Level : -1.5 dBmV
Downstream SNR : 37.8 dB

Upstream Lock : Locked
Upstream Channel ID : 3
Upstream Frequency : 42800000 Hz
Upstream Modulation : QPSK
Upstream Symbol Rate : 2560 Ksym/sec
Upstream transmit Power Level : 49.0 dBmV
Upstream Mini-Slot Size : 2


Cable Modem Event Log
First Time Last Time Priority Description
Wed Mar 05 18:05:17 2008 Wed Mar 05 18:05:17 2008 Information (7) The s/w filename specified in the config file is the same as ...
Wed Mar 05 18:05:17 2008 Wed Mar 05 18:05:17 2008 Information (7) A software upgrade filename was specified in the config file.
Wed Mar 05 18:05:17 2008 Wed Mar 05 18:05:17 2008 Information (7) Authorized
Wed Mar 05 18:05:17 2008 Wed Mar 05 18:05:17 2008 Information (7) Registration complete!
Wed Mar 05 18:05:17 2008 Wed Mar 05 18:05:17 2008 Information (7) We registered with a DOCSIS 1.0 config file!
Wed Mar 05 18:05:17 2008 Wed Mar 05 18:05:17 2008 Information (7) Received a REG-RSP message from the CMTS...
Wed Mar 05 18:05:17 2008 Wed Mar 05 18:05:17 2008 Information (7) Sending a REG-REQ to the CMTS...
Wed Mar 05 18:05:17 2008 Wed Mar 05 18:05:17 2008 Information (7) CableModem SNMP configure complete
Wed Mar 05 18:05:14 2008 Wed Mar 05 18:05:14 2008 Information (7) IP init completed ok
Wed Mar 05 18:05:14 2008 Wed Mar 05 18:05:14 2008 Information (7) CableModem TFTP init ok
Time Not Established Time Not Established Error (4) ToD request sent- No Response received
Time Not Established Time Not Established Information (7) CableModem DHCP client init ok
Time Not Established Time Not Established Critical (3) DHCP WARNING - Non-critical field invalid in response.
Time Not Established Time Not Established Information (7) MAP w/initial maintenance region received
Time Not Established Time Not Established Information (7) Downstream sync ok
Time Not Established Time Not Established Information (7) Beginning initial ranging...
Time Not Established Time Not Established Information (7) downstream time sync acquired...
Time Not Established Time Not Established Information (7) Downstream sync ok
Time Not Established Time Not Established Information (7) starting ds time sync acquisition...
Time Not Established Time Not Established Information (7) Locked on the downstream. Waiting for UCDs...
Time Not Established Time Not Established Information (7) Downstream lock ok
Time Not Established Time Not Established Information (7) Sync Start
Time Not Established Time Not Established Critical (3) DHCP WARNING - Non-critical field invalid in response.
Time Not Established Time Not Established Critical (3) DHCP WARNING - Non-critical field invalid in response.
Time Not Established Time Not Established Critical (3) DHCP WARNING - Non-critical field invalid in response.
Time Not Established Time Not Established Critical (3) DHCP WARNING - Non-critical field invalid in response.
Time Not Established Time Not Established Critical (3) DHCP WARNING - Non-critical field invalid in response.
Time Not Established Time Not Established Critical (3) DHCP WARNING - Non-critical field invalid in response.
Time Not Established Time Not Established Critical (3) DHCP WARNING - Non-critical field invalid in response.
Time Not Established Time Not Established Critical (3) DHCP WARNING - Non-critical field invalid in response.
Time Not Established Time Not Established Critical (3) DHCP WARNING - Non-critical field invalid in response.
Time Not Established Time Not Established Critical (3) DHCP WARNING - Non-critical field invalid in response.

please could someone tell me the solution how to fix this problem

i thank you soo much

tony

moaningmags
06-03-2008, 03:12
From my limited knowledge of the ntl side, I think that looks ok. Only bad when you see T3 or T4 timeouts. But I could be wrong.

Richy99
06-03-2008, 11:03
what area are you in? you might be in an oversubscribed area

Nedkelly
06-03-2008, 12:49
What ype of modem do you have look on the bottom it wil say ambit 100 / 120 200 silver modems 250 is the blue modem 255 256 black VM modem :)

Hom3r
06-03-2008, 13:04
you may have an old modem
you should have QAM256 not QAM64

DancingBrave
06-03-2008, 13:07
I thank you all for taking the time to reply

i have the black modem virginmedia 255

rm8 area

Hom3r
06-03-2008, 13:10
What SW version is the modem on http://192.168.100.1/CmInfo.asp (Cable Modem Information)

what data rates is the modem using http://192.168.100.1/CmOpConfig.asp (Operation Configuration)

DancingBrave
06-03-2008, 13:20
Software Version : 2.94.1014

Network Access : Allowed
Maximum Downstream Data Rate : 20480000
Maximum Upstream Data Rate : 768000
Maximum Upstream Channel Burst : 1600
Maximum Number of CPEs : 1
Modem Capability : Concatenation Enabled, Fragametation Enabled, PHS Disabled

Sirpingalot
06-03-2008, 13:22
some areas haven't been upgraded to the 256QAM yet.

Hom3r
06-03-2008, 13:23
is you modem left on 24/7?

If so turn it off for a couple of minutes, QAM64 may be you problem

DancingBrave
06-03-2008, 13:43
I allways turn it off at night because my last modem used to overheat and when the guy from virginmedia came he replaced it and said its best to turn it off at night so i do,

ok i will turn it off now what does that 256qam do is it better than my qam64

---------- Post added at 12:43 ---------- Previous post was at 12:25 ----------

Right quick update guys

just before i get disconnected from a online server my send light flashes very fast and thats the only one that flashes ????

still same qam thingy ????

lucevans
06-03-2008, 14:02
QAM64 /256 isn't a choice that can be reset by a modem reboot- it's the scheme of modulation that a particular network uses. Virgin Media is not one uniform network, but an amalgamation of many smaller local networks that have been created at different times, using different hardware by different companies. Gradually over the years, the number of independent local cable operators has diminished as smaller companies were bought-up by larger ones. The final stage of this process was when Telewest, NTL and blueyonder were consolidated under the re-branding called "Virgin Media Broadband" early last year.

QAM256 enables more bits per symbol to be transmitted, but is more sensitive to noise than QAM64, so requires better quality cabling and hardware in order to be reliable, hence some older parts of the ex-NTL network are currently not up to using it (e.g. Peterborough: ex-NTL > ex-ex-Bell Cable Media system is still utilizing QAM64 - and I don't have any particular problems with it, it works okay most of the time...)

DancingBrave
06-03-2008, 20:09
I understand now thank you

So what should i do then ????

JenJen
06-03-2008, 20:17
What is the mac address of the modem? I can run a diagnostic test to it, which will confirm if anything is causing intermittent connection. If there is a fault you can get a technician booked to sort it out.

DancingBrave
06-03-2008, 20:34
do you want me to pm you it or type it here

JenJen
07-03-2008, 00:34
whichever your comfortable with, but i'm off tomorrow so cant test till saturday sorry.