HOw do I configure 2 routers to work together?
14-12-2006, 22:30
|
#1
|
Inactive
Join Date: Jun 2003
Location: England
Services: I no longer receive cable services, I blame the inept accounts dept for that.
Posts: 3,731
|
HOw do I configure 2 routers to work together?
Hello everyone,
I have a Belkin F5D7632-4 ADSL Modem Router (wireless) as my main networking device.
I also have a spare Belkin F5D7632-4 ADSL Modem Router (wireless)
that I would also like to use upstairs as another point of entry to my home network.
Question is, how?
I don't want to use the modem bit, I just want access via the wired ports through the ether of wireless to the main router & out to the world.
Trying them both on, seperate PC's while in the router config for the spare, the main router config page said it was in use.
So it seems to me that it should not be at IP 192.168.2.1.
Any suggestions for what it should be?
How do I get it to also use DHCPfor whatever is plugged into it? or should I set it up to be non DHCP with specific ports for whatever is plugged into it? (and how).
Any helpful suggestions welcome.
Thank you, & a merry forthcoming Christmas to you all.
Zoombini.
|
|
|
14-12-2006, 22:33
|
#2
|
Guest
|
Re: HOw do I configure 2 routers to work together?
I cant see how you can do this wirelessly.Wired the second router would act as a switch but I cant see it working wirelessly.I hope im wrong cuz then ill learn something new today
|
|
|
14-12-2006, 22:42
|
#3
|
cf.mega poster
Join Date: Jun 2003
Location: Warrington ntl:81304 Altitude: 12m (and falling)
Posts: 4,499
|
Re: HOw do I configure 2 routers to work together?
Sounds like what you need is a WAP that supports bridge mode or a printer server that does the same.
eg: http://www.netgear.com/Products/Prin...s/WGPS606.aspx
|
|
|
14-12-2006, 23:14
|
#4
|
cf.mega poster
Join Date: Jul 2004
Location: Winnersh UK
Services: LL Phone, TiVo, M+ VM mobile, BBand 150M tier Superhub, TIVO 500 M+
Posts: 2,116
|
Re: HOw do I configure 2 routers to work together?
Quote:
Originally Posted by zoombini
Hello everyone,
I have a Belkin F5D7632-4 ADSL Modem Router (wireless) as my main networking device.
Zoombini.
|
Hi,
I wanted to connect a WRT54GS to the BEFSR41 routers and this is how Linksys support told me how to do it, hopefully it will give you an idea on how to configure your Belkin routers.
"Thank you for contacting Linksys Technical Support.
To connect the WRT54GS to the BEFSR41, use a straight through cable from the ethernet port of the BEFSR41 to one of the ethernet ports of the WRT54GS.
The wired and the wireless router should be on the same range of IP address for the computers behind them will communicate with each other. For example, if the wired router has an IP address of 192.168.1.1, change the IP address of the wireless router to 192.168.1.2 and then disable the DHCP server of the wireless router for the computers to get an IP address from the wired router and will then communicate with each other."
Ken W
|
|
|
14-12-2006, 23:33
|
#5
|
Guest
|
Re: HOw do I configure 2 routers to work together?
thats where it all falls apart he wants to connect the routers wireless
|
|
|
15-12-2006, 20:39
|
#6
|
Inactive
Join Date: Jun 2003
Location: England
Services: I no longer receive cable services, I blame the inept accounts dept for that.
Posts: 3,731
|
Re: HOw do I configure 2 routers to work together?
I want to use it wirelessly as another access point.
|
|
|
15-12-2006, 22:16
|
#7
|
Inactive
Join Date: Jan 2004
Posts: 3,898
|
Re: HOw do I configure 2 routers to work together?
Do both routers have WDS (wireless distrubtion system) support?
|
|
|
15-12-2006, 22:19
|
#8
|
Inactive
Join Date: Jun 2006
Location: Cambridge
Services: Sky TV, VM TV, 20meg bb, tel, and a lobster (but the lobster died).
Posts: 4,349
|
Re: HOw do I configure 2 routers to work together?
You could link the routers with a pair of homeplug/powerline bridges (e.g. http://www.solwise.co.uk/net-powerline.htm), as they have to be near sockets anyway.
|
|
|
16-12-2006, 02:21
|
#9
|
Inactive
Join Date: Jun 2003
Location: England
Services: I no longer receive cable services, I blame the inept accounts dept for that.
Posts: 3,731
|
Re: HOw do I configure 2 routers to work together?
Quote:
Originally Posted by dragon
Do both routers have WDS (wireless distrubtion system) support?
|
I have no idea...
|
|
|
16-12-2006, 03:27
|
#10
|
Inactive
Join Date: Oct 2006
Posts: 1,604
|
Re: HOw do I configure 2 routers to work together?
You commonly find that ADSL modems dont support Wireless Bridging...
However if you can somehow connect the two networks with cable you should be able to
I picked up a linksys ADSL pack from Dixons (impulse buy I didnt need it just was intrigued as to why they were selling a pack for £40 when it should of cost me £80 - the manager was not impressed) -
Anyway having no need for the router I just changed the ADSL settings to an internal static IP with default route and DHCP as per the home network - note that the router needs to be physically plugged into the network (no wireless bridging eith mine either)
|
|
|
16-12-2006, 07:46
|
#11
|
Inactive
Join Date: Jan 2006
Posts: 3,270
|
Re: HOw do I configure 2 routers to work together?
Quote:
Originally Posted by zoombini
Hello everyone,
I have a Belkin F5D7632-4 ADSL Modem Router (wireless) as my main networking device.
I also have a spare Belkin F5D7632-4 ADSL Modem Router (wireless)
that I would also like to use upstairs as another point of entry to my home network.
Question is, how?
I don't want to use the modem bit, I just want access via the wired ports through the ether of wireless to the main router & out to the world.
Trying them both on, seperate PC's while in the router config for the spare, the main router config page said it was in use.
So it seems to me that it should not be at IP 192.168.2.1.
Any suggestions for what it should be?
How do I get it to also use DHCPfor whatever is plugged into it? or should I set it up to be non DHCP with specific ports for whatever is plugged into it? (and how).
Any helpful suggestions welcome.
Thank you, & a merry forthcoming Christmas to you all.
Zoombini.
|
a quick search and restating that need for "Wireless Bridge/WDS" it seems some belkin have it some dont read some more.
http://www.wirelessforums.org/alt-in...ters-4068.html
http://search.ntlworld.com/ntlworld/...in%20F5D7632-4
some 3rd party firmware can be used but not sure about your belkin as much of its only now becoming usable in linux and i dont keep up with the router side of it or weather they have managed to put something on there or not.
keep looking and you can update us here perhaps..
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 20:54.
|